« previous next »
Pages: [1]   Go Down

Author Topic: little dents in .223 cases?  (Read 919 times)

0 Members and 1 Guest are viewing this topic.

Offline doninva

  • Trade Count: (35)
  • Contributor
  • ***
  • Posts: 412
  • Gender: Male
little dents in .223 cases?
« on: July 01, 2013, 12:44:14 PM »
Do you guys worry about little dents in .223 cases. I think alot of the cases get the dents from ejection out of an AR. Thanks, Don
Logged

Offline Land_Owner

  • Global Moderator
  • Moderators
  • Trade Count: (31)
  • Senior Member
  • *****
  • Posts: 4536
    • Permission Granted - Land Owner
Re: little dents in .223 cases?
« Reply #1 on: July 01, 2013, 01:08:06 PM »
Not one bit.  If the case is not cracked and it will size, the internal pressure of firing it again will either slam the dents back out to spec of your chamber or split the case. 
Logged

Offline cybin

  • Trade Count: (25)
  • Contributor
  • ***
  • Posts: 399
Re: little dents in .223 cases?
« Reply #2 on: July 01, 2013, 04:19:14 PM »
Agree with Land_Owner
 
cybin
Logged

Offline Tuco Ramirez

  • Trade Count: (0)
  • Member
  • *
  • Posts: 14
  • Gender: Male
Re: little dents in .223 cases?
« Reply #3 on: February 04, 2014, 08:06:27 AM »
They don't bother me at all. Also no noticeable affects when using them.  :)
Logged
When you have to shoot, "Shoot" don't talk

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: little dents in .223 cases?
« Reply #4 on: February 04, 2014, 09:44:30 AM »
No but if it bothers you then have someone tune your gun.
Logged
If ya can see it ya can hit it !

Offline OldSchoolRanger

  • Trade Count: (60)
  • Senior Member
  • *****
  • Posts: 2742
Re: little dents in .223 cases?
« Reply #5 on: February 04, 2014, 04:35:38 PM »
Quote from: SHOOTALL on February 04, 2014, 09:44:30 AM
No but if it bothers you then have someone tune your gun.
Or change the load.
Logged
"You are entitled to your own opinions, but you are not entitled to your own facts." - Sen. Daniel Patrick Moynihan

When you allow a lie to go unchallenged, it becomes the truth.

My quandary, I personally, don't think I have enough Handi's but, I know I have more Handi's than I really need or should have.

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: little dents in .223 cases?
« Reply #6 on: February 05, 2014, 01:38:07 AM »
Quote from: OldSchoolRanger on February 04, 2014, 04:35:38 PM
Quote from: SHOOTALL on February 04, 2014, 09:44:30 AM
No but if it bothers you then have someone tune your gun.
Or change the load.



true !
Logged
If ya can see it ya can hit it !

Offline drdougrx

  • GBO Supporter
  • Trade Count: (10)
  • Senior Member
  • *****
  • Posts: 3212
Re: little dents in .223 cases?
« Reply #7 on: February 05, 2014, 04:04:18 AM »
NOPE
Logged
If you like, please enjoy some of my hunt pics at:

http://public.fotki.com/DrDougRx

If you leave a comment, please leave your GB screen name so that I can reply back!

Offline LaOtto222

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3828
  • Gender: Male
Re: little dents in .223 cases?
« Reply #8 on: February 05, 2014, 05:41:53 AM »
Small dents do not bother me at all. However, large dents do bother me and are culled out before sizing.

Good Luck and Good Shooting
Logged
Great men have vision and resolve to make dreams come true.

Offline gypsyman

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 4852
Re: little dents in .223 cases?
« Reply #9 on: February 06, 2014, 03:26:53 AM »
Just out of curiosity, are the dents occurring when you shoot the gun, or sizing the brass? I haven't noticed any real dents when I shoot, but might get some small ones on the shoulder when I'm sizing. I've pretty much eliminated that problem with Imperial sizing die wax. Made by Redding now. gypsyman
Logged
We keep trying peace, it usually doesn't work!!Remember(12/7/41)(9/11/01) gypsyman

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: little dents in .223 cases?
« Reply #10 on: February 06, 2014, 06:44:53 AM »
Depending on how the ejector is adjusted the empty case can hit the case deflector so it leaves a dent sometimes or other parts of the rifle as it leaves. If I shoot 223 ammo never have a dent with most loadings. With 556 ammo factory loads I get dents. I'm sure there are other causes.
Logged
If ya can see it ya can hit it !
Pages: [1]   Go Up
« previous next »