RealBow.....

[jrdavis]

if you want to figure out the max length of bullet that a 1/48 will stablize there is a web site at http://members.aye.net/~bpsen.math.html at end of
the write up is the Greenhill formula. in this case your barrel will stablize a bullet aprox .32 inch or shorter.
150x.32x.32 divided by 48=.32

[Real Bow]

Between the holidays, work, and the weather...I haven't made it outside to try "long range!!"

I've been shooting in my basement (what!!)..

Yeah, I've got a 14 yard range, shooting into extruded rubber (about 14" thick) in front of an Outer's .22 bullet trap. The 110 grain Maix's are loaded with 5 grains of 777 FFFg.....I figure my wife let's me shoot because the smoke ain't as bad as with Goex!!!

Anyways, I've been getting bullets-touching-each-other groups.

Not conclusive by any stretch of the imagination. Once I get outside and shoot 35 - 40 grains of some Real BP (Goex) and the 110 grain Maxi's...I'll let you know.

I do like that formula that's been presented to calculate "correct" twist rates...(being a retired electrical engineer)....ohhh  formulas are so fascinating!!!