Author Topic: .950 JDJ? I've never heard of it before.  (Read 512 times)

0 Members and 1 Guest are viewing this topic.

Offline Argent 88

  • GBO DJ
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3768

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26941
  • Gender: Male
Re: .950 JDJ? I've never heard of it before.
« Reply #1 on: August 03, 2020, 07:07:50 AM »
Yes that's correct, a .95 caliber rifle with the bullet being 0.95" in diameter. It was a JD Jones aka SSK Industries special. JD is like that, he loves big bore guns. JD used to advertise with me until we sold GBO. He and I used to talk often.

Parent case is the 20 mm cannon round. This round would actually be necked UP not down as 20 mm is only .79 caliber.


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline darkgael

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1654
  • The readiness is all. 4049 posts from the “old” gb
Re: .950 JDJ? I've never heard of it before.
« Reply #2 on: August 04, 2020, 12:00:54 AM »
There are quite a few videos on YouTube about the cartridge and rifle.

Offline ironglows

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4387
Re: .950 JDJ? I've never heard of it before.
« Reply #3 on: August 04, 2020, 12:22:32 AM »
Yes..nearly an inch, but I am not interested, since I have used mortars years ago !   ;) ;D
"They have the guns and therefore we are for peace and for reformation through the ballot. When we have the guns, then it will be through the bullet"      (Saul Alinsky) ...hero of the left..

Offline Argent 88

  • GBO DJ
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3768
Re: .950 JDJ? I've never heard of it before.
« Reply #4 on: August 04, 2020, 03:54:51 AM »
Yes that's correct, a .95 caliber rifle with the bullet being 0.95" in diameter. It was a JD Jones aka SSK Industries special. JD is like that, he loves big bore guns. JD used to advertise with me until we sold GBO. He and I used to talk often.

Parent case is the 20 mm cannon round. This round would actually be necked UP not down as 20 mm is only .79 caliber.


Does he build the rifles himself? It would seem that you couldn't use just anything off the shelf. It sorta looks
like one of those Anti tank guns that Finland used during WWII.

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26941
  • Gender: Male
Re: .950 JDJ? I've never heard of it before.
« Reply #5 on: August 04, 2020, 04:11:06 AM »
Yes they build the rifles and barrels and such. That is the business at SSK. Dunno if he still does it these days but back when I used to talk with JD regularly he went out on the factory floor and actually worked on the guns himself.


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline ironglows

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4387
Re: .950 JDJ? I've never heard of it before.
« Reply #6 on: August 04, 2020, 06:36:26 AM »
" Parent case is the 20 mm cannon round. This round would actually be necked UP not down as 20 mm is only .79 caliber."
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Hard  to figure how he would chamber that round!  Does that mean the shell is greatly fire  formed with each shot, since the cartridge must resemble a mushroom.?
"They have the guns and therefore we are for peace and for reformation through the ballot. When we have the guns, then it will be through the bullet"      (Saul Alinsky) ...hero of the left..

Offline Bob Riebe

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 7463
Re: .950 JDJ? I've never heard of it before.
« Reply #7 on: August 04, 2020, 07:13:53 AM »
Machine Gun Shoot Ricochet – .950 JDJ Into Man’s Leg
https://www.thefirearmblog.com/blog/2017/07/07/man-takes-artillery-ricochet/

Offline ironglows

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4387
Re: .950 JDJ? I've never heard of it before.
« Reply #8 on: August 04, 2020, 07:23:07 AM »
...Looks like it is necked down slightly.  Now for the next logical question...


  What is it good for, other than bruising some spectator's ankle?
"They have the guns and therefore we are for peace and for reformation through the ballot. When we have the guns, then it will be through the bullet"      (Saul Alinsky) ...hero of the left..

Offline JoeG52

  • Trade Count: (3)
  • Contributor
  • ***
  • Posts: 275
Re: .950 JDJ? I've never heard of it before.
« Reply #9 on: August 04, 2020, 08:21:21 AM »
...Looks like it is necked down slightly.  Now for the next logical question...


  What is it good for, other than bruising some spectator's ankle?
The case is necked down slightly, but it is necked up from a 20 mm. Sort of like making a 30-06 from a 270.
 It looks like it would be good for ruining the shoulder of the shooter.

Offline Bob Riebe

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 7463
Re: .950 JDJ? I've never heard of it before.
« Reply #10 on: August 04, 2020, 09:40:15 AM »
J.D. Jones makes numerous odd balls because he can.