Author Topic: 30 herrette (Read 974 times)

rickyp · « **on:** June 28, 2004, 05:09:54 PM »

is there a 30 herrette case necked down to 7 mm, 6.5 or 6 mm?

I think a necked down 30 herrette to 7 mm out of a 10 inch contender barrel would be a great deer round, should be better then the 7-30

Nobade · « **Reply #1 on:** June 29, 2004, 02:34:45 AM »

Somebody somewhere has probably done it, and you're right it should work well. However, I'm not sure you'd gain much over a 7 TC-U since the pressures would need to be held lower due to the bigger case head. I suspect you'd end up pretty close in performance for a lot more expense of dies and a reamer.

bgjohn · « **Reply #2 on:** June 29, 2004, 05:54:43 AM »

Try the TCU's. I love'm .

JM

rickyp · « **Reply #3 on:** June 30, 2004, 02:06:49 AM »

I got me a 14 inch 7tcu and love it. But the shorter case may be more efficient

Gavinator · « **Reply #4 on:** July 11, 2004, 07:50:42 AM »

The closest I can think of is the E.A. Brown 7mm Ultimate Silhouette. A 30-30 case at 1.75" . Website @ www.eabco.com/images/reload034.gif for numbers, /reload031.gif for case drawing.