« previous next »
Pages: [1]   Go Down

Author Topic: Firing Pin Selector on Hammer Problem  (Read 284 times)

0 Members and 3 Guests are viewing this topic.

Offline Mark

  • Trade Count: (1)
  • Member
  • *
  • Posts: 20
Firing Pin Selector on Hammer Problem
« on: March 31, 2004, 10:42:52 AM »
I am experiencing a new problem on a contender pistol.  I sent the frame off to TC for repair for a reoccurring loose firing pin plate cover.  I believe TC replaced several parts.  My new problem is that when firing the pistol with a 44 mag barrel, the firing pin selector moves from centerfire to the no fire position following every shot.  With a milder recoiling barrel (22 LR) this does not happen.  Any one have any ideas?  I know if I send it to TC they would fix it for free, but I hate to do without it for the 3 to 4 weeks it would take, plus shipping it is a hassle.  Thanks.
Logged

Offline KN

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1962
Firing Pin Selector on Hammer Problem
« Reply #1 on: March 31, 2004, 01:30:18 PM »
Call TC, They will probably send you a new hammer or the nessesary parts to fix it.  KN
Logged

Offline helobill

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 289
Firing Pin Selector on Hammer Problem
« Reply #2 on: April 01, 2004, 03:52:19 AM »
I had a similar prob at first with one of my frames and a 10" 44mag barrel. Sprayed some carburator cleaner and cleaned everything, no more problem. I think there were some metal shavings left in the selector (at least they came from somewhere, I caught all the 'washouts' in a cloth). Obviously make sure you relubricate everything when you're done. Worth a shot before you ship it back to T/C.
Bill
Logged
Pages: [1]   Go Up
« previous next »