Author Topic: Ejector to extractor??? (Read 1371 times)

Ringo Steele · « **on:** April 07, 2004, 01:27:14 PM »

Howdy folks!

Anybody know how to convert the ejector on a Pardner shotgun to an extractor? I want to experiment using it for CAS shooting with all-brass shotshells and BP. (Would use my LeFever Nitro Special, but she's coming loose at the rib, and I don't have the gold dust to fix her right now.

)

Thanks! :grin:

Ringo Steele

GrampaMike · « **Reply #1 on:** April 07, 2004, 02:10:47 PM »

Sorry that this is off your subject, but is Steele your real name. I ask because I have alot of Steele relatives in Tennessee.

Mike

Ringo Steele · « **Reply #2 on:** April 07, 2004, 03:25:38 PM »

Nope, it's my SASS alias :grin:
Got if from the "ring o' steel" that we like to hear when we shoot good! :wink:

All the best!
Ringo

Busta · « **Reply #3 on:** April 07, 2004, 06:34:41 PM »

Quote from: Ringo Steele

Howdy folks!

Anybody know how to convert the ejector on a Pardner shotgun to an extractor? I want to experiment using it for CAS shooting with all-brass shotshells and BP. (Would use my LeFever Nitro Special, but she's coming loose at the rib, and I don't have the gold dust to fix her right now. )

Thanks! :grin:

Ringo Steele

I think Silver Vaquero posted this once on the old H&R Talk. There is a step in the ejector that has to be ground away. That sound you hear when you break it open and the empty flies out will be gone and it will just push your hull up far enough for you to grab it. Silver Vaquero may have saved the diagram, it is really a simple modification.

WNY_Whitetailer · « **Reply #4 on:** April 08, 2004, 07:25:35 AM »

Ringo, A little heads up for you...Silver Vaquero is now known as Raynor on this site...If he doesn't see this post you may want to PM him.

raynor · « **Reply #5 on:** April 08, 2004, 02:57:13 PM »

Hey guys, I'm doing some looking. If I can find the pic I'll post it here, that post was on the old site and guess what? Didn't save that thread.

Real simple conversion, just have to grind off the little step on the ejector with a dremel.

Let me see if I can find that pic. ~~ raynor

raynor · « **Reply #6 on:** April 08, 2004, 03:03:31 PM »

Attemp at your own risk, I'm not responsible for any accidents, deaths, missing eyes or what ever. Sounds harsh I know, just covering my butt.

Pretty crappy drawing and pic, but it'll do.

Drive out the small roll pin closest to the breech end and the ejector should slide out. Works best if the ejector is popped out, as it would be after ejecting a shell. It's under less spring tension that way, less chance of losing the spring. It'll still be under some spring tension so be careful not to lose the spring if it flies out.

MOST of all, watch your eyes! Wear safety glasses if you have them.

I used a dremel tool with a cut-off wheel to do about 10 of them, works great. Take you time and get it as close to square as possible. Shouldn't take much over 10 minutes start to finish.

I don't visit the shotgun forum much, so thanks for the e-mail.

Thanks, Whitetailer for the heads up on my name change. ~~ raynor (sv)

Ringo Steele · « **Reply #7 on:** April 08, 2004, 03:10:19 PM »

:-D Thanks, Raynor!!! :wink:

raynor · « **Reply #8 on:** April 08, 2004, 03:17:17 PM »

No prob, I never have liked ejectors, convert mine all over. Takes about 5 minutes once you've done a few.

Have fun!

perklo · « **Reply #9 on:** April 08, 2004, 04:15:02 PM »

Here's a little pdf file on disassembly of the Ejector.

Be aware though, some newer guns have an additional tensioning, spring loaded "button" that I have yet to see in person.

Basic disassembly is the same though (or so I'm told), so just pay attention to how that button is positioned and all will be well...

http://perkloafm.com/pixs/ejector_disass.pdf

- perklo

WNY_Whitetailer · « **Reply #10 on:** April 09, 2004, 07:16:49 AM »

Thanks Perklo and Raynor...I don't know if I will try the conversion but the info is good to know for people who ask.