Author Topic: SB alloy? (Read 409 times)

Longcruise · « **on:** April 06, 2004, 06:04:32 PM »

Hi fellow shooters. Here is a question I hope someone can answer. Maybe one of you proffessional cast bullet guys.

Few years ago I got some alloy from a local guy called SB. Don't remember what was in it but it made a nice bullet and shot well in my .44 mag and 45-70. It was a little expensive and so I'm wondering what it's made of so maybe can mix some up. Any help appreciated.

Lloyd Smale · « **Reply #1 on:** April 06, 2004, 11:05:34 PM »

sb is the element sign for antimony. I doubt that it is straight antimony as it wouldnt cast a good bullet. I would guess that someone added antimony to some pure and marked it as such. Do a hardness test and see what you come up with.

Longcruise · « **Reply #2 on:** April 07, 2004, 07:47:29 AM »

For sure it wasn't straight tin. Matter of fact, I bought some tin ingots from the same guy that day.

Quote

I would guess that someone added antimony to some pure and marked it as such. Do a hardness test and see what you come up with.

That seems likely. I don't have a hardness tester but can put one face to face in the vise with an aircooled wheel weight and see which one says uncle first :-)

Will report back with results.

Leftoverdj · « **Reply #3 on:** April 08, 2004, 06:25:36 AM »

If the guy was selling tin ingots, he may also have been selling high antimony ingots for alloying. Never bought any, but I recall seeing 50/50 antimony/lead ingots for sale. Doubt they woulda made good bullets straight, though.