Let me tell you how to get one. Hit the pawn shops & find a Stevens with wood in decent condition. Refinish then order the 10 ga Aftermarket (stevens 94 never did have 10 ga) from egunparts .com for 59.00. You will also need to order the spring and latch pin. They will tell you what you need. My son & I had to grind the ejector down a bit to make it fit properly. These are 36" 10ga barrels made to fit Stevens 94 but require minor fitting, Revelation 350, Sears 101.1, Savage 94, they are all the same gun. Make sure the forearm is the type that screws into the barrel. Many Stevens have a pop-on. If you can't find a gun with screw on, egunparts.com has the matching forearm to go with the barrel. The shopping was fun because these guns in decent condition can be bought for less than 70.00. Like I said, I got mine for 45.00. the shop was full of guns, he was not taking in any more, and was desperate to move some. egunparts.com has every part for this gun if needed. I shot a paper turkey pattern at about 65 yards with #4 Winchester 10ga lead . I got 6 or 7 shots in the upper body area. All modern 10 ga is 3.5 this gun is 3.5" chamber or I would not have got it. You can complete this project for less than 100.00. Show me your photo when you are done. I don't know if this gun is Full or Mod., No markings for that, but it is one of the 2.
