« previous next »
Pages: [1]   Go Down

Author Topic: 30-06 POWDER  (Read 785 times)

0 Members and 1 Guest are viewing this topic.

Offline razmuz

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 271
30-06 POWDER
« on: April 28, 2004, 04:32:37 PM »
If you were limited to only a 30-06 rifle and could only pick one powder which would you pick?  Remember only "ONE" powder for everything.
Logged

Offline ricciardelli

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1004
  • Gender: Male
    • http://stevespages.com/page8.htm
30-06 POWDER
« Reply #1 on: April 28, 2004, 04:51:44 PM »
Picking one powder for bullet weights from 57 grains to 250 grains is NOT the reason for reloading...and it is NOT practical.
Logged

Offline HoCoMDHunter

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 118
30-06 POWDER
« Reply #2 on: April 28, 2004, 04:55:17 PM »
Maybe because I've not been reloading that long (about 4 years), but I am a one powder kind of guy.  I do a little research on the most popular and flexible powder for a particular round and I use it.  If I am pleased with the results I stick with it.  I have only ever used Varget for my 30-06 and have been very pleased with the accuracy and consistency.  I load from 125 gr varmint loads to 165 gr larger game loads and have been very happy with the results. <moa for every bullet I have tried.
Logged
Doin' my best to keep up with Maryland's one handgun a month law.

Offline Dand

  • GBO Supporter
  • Trade Count: (35)
  • Senior Member
  • *****
  • Posts: 2974
4350
« Reply #3 on: April 28, 2004, 10:52:50 PM »
I mostly load IMR 4350 behind 180 gr bullets in my '06.  It worked so good (accurate) back in the mid 70's that I've seen no need to change.  If I was just starting I'd take a good look at the Reloader series (#19??) which appears in many new manuals  to do very well in the '06.
Logged
NRA Life

liberal Justice Hugo Black said, and I quote: "There are 'absolutes' in our Bill of Rights, and they were put there on purpose by men who knew what words meant and meant their prohibitions to be 'absolutes.'" End quote. From a recent article by Wayne LaPierre NRA

Offline m14dan

  • Trade Count: (0)
  • Member
  • *
  • Posts: 40
    • http://www.dansshootingsupply.com
30-06 POWDER
« Reply #4 on: April 29, 2004, 03:17:53 AM »
probably 4895. It really depends on the action type too though. Maybe 4350 if you were talking bolt action only but for anything, including the M-1 it would be 4895.
Logged

Offline Dave in WV

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2162
30-06 POWDER
« Reply #5 on: April 29, 2004, 03:19:52 AM »
H4350 or IMR 4350.
Logged
Setting an example is not the main means of influencing others; it is the only means
--Albert Einstein

Offline IntrepidWizard

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1130
30-06 POWDER
« Reply #6 on: April 29, 2004, 05:27:36 AM »
Been using 4350 since the 50's in 06,and 3031 in 30-30 for same time frame---if ain't broke don't fix it.
Logged
Government is not reason; it is not eloquence; it is force! Like fire, it is
a dangerous servant and a fearful master. -- George Washington

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
30-06 POWDER
« Reply #7 on: April 29, 2004, 09:32:22 AM »
For a 30-06 I would use IMR4064. I have used the same load for 25 years and it still shoot great.  :grin:
Logged
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline longwinters

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3070
30-06 POWDER
« Reply #8 on: April 29, 2004, 09:53:17 AM »
I have reloaded for 3 different 30-06 rifles.  Useed Reloader 19 and the accuracy was excellent in all cases.

long
Logged
Life is short......eternity is long.

Offline jhm

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3169
30-06 POWDER
« Reply #9 on: April 29, 2004, 01:14:25 PM »
I can remember years ago when it was said that the 30-06 and IMR 4350 were both created for one another!!  However I also like IMR 4831 ? IMR 3031 / IMR 4895 :-D  :D    JIM
Logged

Offline ButlerFord45

  • Moderators
  • Trade Count: (10)
  • Senior Member
  • *****
  • Posts: 1992
  • Gender: Male
30-06 POWDER
« Reply #10 on: April 29, 2004, 01:48:50 PM »
IMR 4350  Haven't changed the load since mid 70's
Logged
Butler Ford
He who does not punish evil, commands it to be done.-Leonardo da Vinci
An armed society is a polite society-Robert A. Heinlein
Only the dead have seen the end of war- Plato
Lord, make my words as sweet as honey
tomorrow I may have to eat them- A lady's sweatshirt

Offline Tom W.

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1294
  • Gender: Male
  • Warning... Does not play well with others!
30-06 POWDER
« Reply #11 on: May 01, 2004, 06:24:58 PM »
Varget works the best for me. Maybe I'm cheap, or maybe I want a powder that I can use in all of my rifles.
I counted about 20 different cans of powder in my storage area, but I'll use the Varget before the rest.
Logged
Tom
Alabama Hunter and firearms safety instructor

I really like my handguns!

Offline jamie

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 332
30-06 POWDER
« Reply #12 on: May 04, 2004, 07:48:32 AM »
165 grn hpbt and W760 gave .5" 3 shot groups with my 15" Encore.  Imr 4350 and H 4831 all stayed around a little over an 1"
Logged
AMMO...
LiFe, Liberty and the Pursuit of all those that threaten it!
Pages: [1]   Go Up
« previous next »