Author Topic: Clearance for hammer spur  (Read 612 times)

0 Members and 1 Guest are viewing this topic.

Offline aulrich

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 678
Clearance for hammer spur
« on: May 14, 2004, 03:51:14 AM »
After mounting my new scope (ultra 243) I noticed that I do not have allot of clearance between the hammer spur about 1/8" it seems that the rear objective is larger that the previous. Is that enough clearance or should I get taller rings?
The second mouse gets the cheese

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Clearance for hammer spur
« Reply #1 on: May 14, 2004, 05:14:30 AM »
That 1/8th inch will be enough, the steel in the hammer spur is not going to stretch that much at impact with the firing pin. that is, as long as you have that clearance with the hammer extension on. You will need a hammer extension with that amount of clearance anyway....<><.... :grin:
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline Wlscott

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 987
Clearance for hammer spur
« Reply #2 on: May 14, 2004, 07:29:15 AM »
On my 45-70 barrel I have a WEaver 6X scope that has waaaay less than an 1/8" clearance.  You should be fine with that much clearance.
You haven't hunted......Until you've hunted the hunters

Offline fast*eddie

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 218
  • Gender: Male
Clearance for hammer spur
« Reply #3 on: May 15, 2004, 03:45:48 PM »
If it works - Don't fix it !
Semper Fi !

Offline marv

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 575
1/8 inch
« Reply #4 on: May 15, 2004, 11:51:46 PM »
If I have 1/8 inch I happy I would rather just 1/8 in, Some I have have 1/4. Aslong as the hammer does not bump or scrap scope all is well.
 My thoughts Marv.