« previous next »
Pages: [1]   Go Down

Author Topic: Elite 4200 4-16x40 AO ?  (Read 791 times)

0 Members and 1 Guest are viewing this topic.

Offline hylander

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 360
  • Gender: Male
Elite 4200 4-16x40 AO ?
« on: May 17, 2004, 02:10:06 PM »
I just ordered this Scope from Jon at the Optic Zone.
Elite 4200 4-16x40  Model #42-4164M
My Question is doe's this Model have the Semi-Target Turret's.
I saw one at the local store and it did. I beleive it is the same model but could be wrong. I want the Target Turret's. When I called Bushnell the guy I talked to  didn't know :?
Logged
Failure is not an option
Placer County, Calif.

Offline big6x6

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 422
Elite 4200 4-16x40 AO ?
« Reply #1 on: May 17, 2004, 03:57:25 PM »
"My Question is doe's this Model have the Semi-Target Turret's"

I'm ALMOST 100% sure that is does.  My 4-16X50 4200 does as do my 6-24X40 4200s.  I'm almost sure the turrets are the same on the 4-16X40 4200...
Logged
Deactivated as trouble maker. Letters to sponsors over inline forum problems.

Offline hylander

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 360
  • Gender: Male
Elite 4200 4-16x40 AO ?
« Reply #2 on: May 17, 2004, 04:29:48 PM »
Thanks Big6X6:
In my Bushnell Catalog those Scope's you mentioned say
Semi-Target Turret's but the 4-16x40 doesn't say :?
Logged
Failure is not an option
Placer County, Calif.

Offline Zachary

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3713
Elite 4200 4-16x40 AO ?
« Reply #3 on: May 17, 2004, 05:20:28 PM »
Guess what I have in my hands...... a Tikka WH Laminated Stainless in .25-06 with an Elite 4200 4x-16x-40mm AO. :grin:

I just went to my gun rack and picked it up so that I could give you your answer.  Yes, it does have target turrets.  Now, I'm not quite sure what they mean by semi-target turrets.  I can say that it has screw on caps for both the horizontal and vertical adjustments, and the turrets are much higher than regular adjustments, AND you can adjust them with your fingers.

And guess what?  I also bought this exact same scope from Jon at the Optic Zone.  I can't tell you how many scopes I have purchased from him - his prices are awesome, and so is his service!  :grin:

In fact, next scope I get will probably also be another 4x-16x-40mm to be mounted on my .264 Win. Mag.

You got yourself one heck of a scope!

Zachary
Logged

Offline hylander

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 360
  • Gender: Male
Elite 4200 4-16x40 AO ?
« Reply #4 on: May 17, 2004, 06:19:06 PM »
Thanks Zachary:
Thats what I wanted to here :-D
This Ain't the first time you answered a Question for me.
I purchased an Elite 3200 3-9x40 from Jon awhile back but wanted more power for my Savage 12FV .223, so I sent it back to Bushnell for a full refund including shipping. Love that no questions asked Gaurantee :shock: .
I plan on sending it to Bushnell for a Custom Retical Change FCH .25 Dot.
So far the Elite's are the brightest, Clearest Scope's I have looked through.
Logged
Failure is not an option
Placer County, Calif.

Offline SLAVAGE

  • Trade Count: (21)
  • A Real Regular
  • ****
  • Posts: 773
Elite 4200 4-16x40 AO ?
« Reply #5 on: May 17, 2004, 07:37:20 PM »
you can send a scope back to bushnell for a rec. chance?
hmm dose any other scope man. do this at all?
an if so cant the mil dots be changed at all?
thanks
dave
Logged

Offline Bushnell Boy

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 143
    • http://www.hotspothunting.com/common/showsite.asp?dovend=0&id=29555
Elite 4200 4-16x40 AO ?
« Reply #6 on: May 18, 2004, 05:19:46 AM »
Zack: A true target turret is usually larger and does not have a cap that goes over like on the Bushnell Elite 3200 10x40. A semi target turret is smaller and usually has a cap that goes over like what you have on your scope.

Side Note: For future reference, you may want to realign the zero marks on the adjustment scale ring with the index line.

        Step one: Sight in rifle
        Step Two: Remove screw from top of turret
        Step three: Lift turret and align "0" with index line. (be sure to lift turret completely off before turning or you will change your point of impact)
         Step four: Put screw back in and and tighten.

If your scope is ever nocked off zero or you have to adjust for windage and elevation you can always move it back to where it was originally sighted in at.

SLAVAGE: Scroll down to the bottom of this link and it explains which reticle can go in which scope. http://www.bushnell.com/productinfo/riflescopes/techtalk.html
Logged
To invent, you need a good imagination and a pile of junk.
Thomas A. Edison (1847 - 1931)

Two roads diverged in a wood, and --
I took the one less traveled by,
And that has made all the difference.
Robert Frost

Offline Zachary

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3713
Elite 4200 4-16x40 AO ?
« Reply #7 on: May 18, 2004, 06:30:55 AM »
Quote from: Bushnell Boy
Zack: A true target turret is usually larger and does not have a cap that goes over like on the Bushnell Elite 3200 10x40. A semi target turret is smaller and usually has a cap that goes over like what you have on your scope.


Actually, you're right.  And on that same note, I'm not very fond of those true turrets because, since there is no cap to cover them, they could loose their adjustment very easily.  Well, maybe yes, maybe no, but adjustments with caps are a whole lot more secure than without.

Zachary
Logged

Offline hylander

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 360
  • Gender: Male
Elite 4200 4-16x40 AO ?
« Reply #8 on: May 18, 2004, 01:36:18 PM »
Thanks for all the Help guy's:
I too Prefer the caps as they keep out dust and other unwanted's.
Also I got an e-mail from Jon conferming the Turrets as well.
I think my Savage 12FV .223 is going to like it's new Glass.
And My 10/22 keep's asking for it's Tasco back :) .
Logged
Failure is not an option
Placer County, Calif.
Pages: [1]   Go Up
« previous next »