Author Topic: Pin keeps breaking on my contender frame!  (Read 467 times)

0 Members and 1 Guest are viewing this topic.

Offline MAX HUNTER

  • Trade Count: (0)
  • Member
  • *
  • Posts: 17
Pin keeps breaking on my contender frame!
« on: July 11, 2004, 03:29:03 AM »
I have one of the newer/ older frames NOT G2. The pin above the trigger keeps breaking. I have replaced it three times. I shoot the .357 Max about 200 rounds per month. Is there some other hidden problem ?
                                                             Max Hunter
[/quote][/b]

Offline Bullseye

  • Trade Count: (9)
  • Senior Member
  • *****
  • Posts: 1879
Pin keeps breaking on my contender frame!
« Reply #1 on: July 11, 2004, 05:37:18 PM »
That pin broke on my oldest frame, but it took ten years of shooting.

Offline cbagman

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 138
Pin keeps breaking on my contender frame!
« Reply #2 on: July 17, 2004, 07:08:45 AM »
Hey.. Write a note explaining your problems and include it with the frame and send it back to T/C... I sent my oldest frame in late last fall and got it back rebuilt for free. If has newest trigger and hammer and a lot of other new parts put on. You will need to hook up with a FFL dealer to get it back, but an individual can send it to T/C with a copy of the dealers FFL and address enclosed... The address is: Thompson Center Arms  Route 11   Farmington Road,  Rochester, NH.  03867..
Also does the barrel have a double lug or single lug locking bolt?? The single lug ones may be a lot harder to release especially if burred up on the bearing surface.  from cbagman
:grin: NRA Life Member
 :wink: Gun Control is Hitting What You Aim For!