Author Topic: 1700fwt,1710fwt,1712FWT+-D  (Read 1095 times)

0 Members and 1 Guest are viewing this topic.

Offline chunter

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 190
    • http://cc.usu.edu/~chunter/shooting.htm
1700fwt,1710fwt,1712FWT+-D
« on: May 21, 2004, 09:55:38 AM »
--------------------------------------------------------------------------------

Hey all,

I thought that I knew a little about Anschutz's rifles especially since I own two of them. However, I am wondering about the naming conventions and differences between the 1700fwt, 1710fwt, 1712fwt. I have also seen these same models with a D attached to the names. What is the difference between all of these models, is it the just the time for the period that they were produced? What does the D stand for?

I have a 1712fwt with a blue graphite stock. I have never seen anyone else with this stock color, does anyone know if there were many of them made?

Thanks

Offline Jerry G

  • Trade Count: (0)
  • Member
  • *
  • Posts: 65
1700
« Reply #1 on: June 20, 2004, 10:14:15 AM »
The 1700 had a slight mod and became the 1710.  Another mod and you have the 1712.  My 1712 has a different trigger guard than the eirler models.  I am not sure of what other mods were made.  The 1700 was imported as a barreled action and stocked with a McMillian stock and became the FWT.  The assembly was done by several dealers around the US.  Most of them have stamped the reciever with their name.  I don't think the stock color means anything.  Some were grey, some black and a few blue.

Offline chunter

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 190
    • http://cc.usu.edu/~chunter/shooting.htm
1700fwt,1710fwt,1712FWT+-D
« Reply #2 on: June 20, 2004, 12:13:30 PM »
Thanks Jerry,   I guess I will be seeing you at nationals.  Doesn't look like I am going to be able to swing it for Lander.

Offline longgun

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 156
1700 fwt & 1712 fwt
« Reply #3 on: June 20, 2004, 03:44:04 PM »
There is one difference that most people don't know about between the 1700 fwt and the 1712 fwt.   The hole spacing for scope mounts are different.  The holes are almost 1/4" difference between 2nd & 3rd hole.  Makes one piece mounts where they are not interchangable.   Don
Deactivated at member's request

Offline nomad

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 463
1700fwt,1710fwt,1712FWT+-D
« Reply #4 on: June 22, 2004, 03:50:11 PM »
"D" is, as I understand it, for "Direkt Abzug". In German, Abzug is trigger and direkt means single stage.
As for the model # changes, keep in mind that you're dealing with a bunch of hard-headed Germans.  :wink:  (I KNOW -- I come from a loooooong line of them!)  :)  EVERY change, no matter how minor, requires a model designation change, suffix, prefix, addendum, whatever.  (Everyzing MUST have a place und it MUST always be in zat place or ve vill haf disorder -- und zat iss absolutely VERBOTEN!)
E Kuney