« previous next »
Pages: [1]   Go Down

Author Topic: Load check - Help needed  (Read 367 times)

0 Members and 1 Guest are viewing this topic.

Offline tipiguy

  • Trade Count: (4)
  • Avid Poster
  • **
  • Posts: 247
Load check - Help needed
« on: June 12, 2004, 02:34:57 PM »
I am reloading some 38 specials with some lead bullets that weigh 148 grains.  I am using Bullseye powder.  The local gunsmith (who shoots a lot of 38 rounds) said to use 3.5 grains of bullseye.  

Is this a safe load?  I see in the nosler book that the max load of 4.1 grains of bullseye with a 158 grain jacketed hollow point.  I can't however find any accurate data on 148 grain lead wad cutters.

Anyone with good load data to help is greatly appreciated.
Logged

Offline grizz

  • Trade Count: (0)
  • Member
  • *
  • Posts: 83
Load check - Help needed
« Reply #1 on: June 12, 2004, 03:26:21 PM »
Logged

Offline larry357

  • Trade Count: (0)
  • Member
  • *
  • Posts: 25
  • Gender: Male
  • Nope, its a 45
Load check - Help needed
« Reply #2 on: June 14, 2004, 01:25:34 PM »
Lee,s book, only place I found 148,s also says 2.8 gr. is max.
Logged
Life member: NRA, NAHC, NAFC
Pages: [1]   Go Up
« previous next »