« previous next »
Pages: [1]   Go Down

Author Topic: 300 rum loading data  (Read 400 times)

0 Members and 1 Guest are viewing this topic.

Offline shoot'n hogs

  • Trade Count: (0)
  • Member
  • *
  • Posts: 97
300 rum loading data
« on: June 15, 2004, 03:10:50 AM »
I would like some info on this load if possible.  I was trying Re25 (88 grains) w/ barnes triple shock 180gr.  It ended up about 1-1/2" group.  Not to good so I called barnes for info.  They told me to seat the bullet .050" off the lands.  I used the same load as before and the group went crazy.  About 5" group at 100 yards.  I would like to stick w/ this bullet if at all possible.  If you shoot a 300 rum, post your pet load here.  Oh yeah, the action is also bedded.
Logged

Offline ricciardelli

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1004
  • Gender: Male
    • http://stevespages.com/page8.htm
300 rum loading data
« Reply #1 on: June 15, 2004, 07:13:54 AM »
You might be better off with RL-22
Logged

Offline VSSF

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 123
300 rum loading data
« Reply #2 on: June 15, 2004, 10:11:23 AM »
Retumbo (98 gr),180 gr.scirrocco
Logged

Offline Val

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 846
300 RUM Load Data
« Reply #3 on: June 15, 2004, 12:52:07 PM »
200 grain Nosler Accubond with 77 grains of IMR 4350, Fed 215 Mag Primers (2840 fps).

180 grain Nosler Partition with 80 grains of IMR 4350, Fed 215 Mag Primer
Logged
Hunting and fishing are not matters of life or death. They are much more important than that.
Pages: [1]   Go Up
« previous next »