« previous next »
Pages: [1]   Go Down

Author Topic: ruger gp100  (Read 559 times)

0 Members and 1 Guest are viewing this topic.

Offline josebd

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 408
ruger gp100
« on: July 26, 2004, 02:29:58 PM »
is it possible to get a scope mount for these if so where?
Logged

Offline TScottW99

  • Trade Count: (0)
  • Member
  • *
  • Posts: 92
  • Gender: Male
  • ΜΟΛΩΝ ΛΑΒE
    • Scouting for wildlife
ruger gp100
« Reply #1 on: July 27, 2004, 04:50:38 AM »
I think I saw the B-Square mount for the GP 100 in the http://www.midsouthshooterssupply.com/  catalog.  Though I can't find it on their web page.  I'll try and look in my catalog when I get home.
Might also want to try, http://www.natchezss.com
Logged
"Let us speak courteously, deal fairly, and keep ourselves armed and ready."

-Theodore Roosevelt

Offline New Hampshire

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 996
ruger gp100
« Reply #2 on: July 27, 2004, 11:49:49 AM »
Yes they are B-Squares, BUT thet are for 6" BBLs ONLY.  They replace the front and rear sight.  Its a full length rib mount.  Last I checked prices Midway USA was cheaper than Natchez, but it MIGHT have changed.  If you have less than a 6" bbl then you can still get a mount for it, but a gunsmith will have to drill and tap the gun for you.
Brian M.
Logged
NRA Life Member
Member Londonderry Fish and Game Club
Member North American Fishing Club
Member North American Hunting Club
Member New Hampshire Historical Society
Member International Blackpowder Hunting Association

Offline TScottW99

  • Trade Count: (0)
  • Member
  • *
  • Posts: 92
  • Gender: Male
  • ΜΟΛΩΝ ΛΑΒE
    • Scouting for wildlife
ruger gp100
« Reply #3 on: July 28, 2004, 03:42:41 AM »
Sorry I didn't check.  Went to a VCDL meeting after work and it ran forever.  Got home and went to bed.  :?
Logged
"Let us speak courteously, deal fairly, and keep ourselves armed and ready."

-Theodore Roosevelt

Offline 7bru

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 101
ruger gp100
« Reply #4 on: July 29, 2004, 01:17:22 PM »
make sure you really tighten down real good.works real good on my gp. it handles max loads just fine. you can use a red dot or a burris scope with weaver rings.BRU
Logged
Pages: [1]   Go Up
« previous next »