« previous next »
Pages: [1]   Go Down

Author Topic: Reuced 30-06 loads  (Read 868 times)

0 Members and 2 Guests are viewing this topic.

Offline Sergeantlbt

  • Trade Count: (0)
  • Member
  • *
  • Posts: 20
Reuced 30-06 loads
« on: January 18, 2003, 02:50:50 PM »
Does anybody have any suggestions for a reduced 30-06 load?  I am thinking of Speer's 100gr Plinker.  Any suggestions would be appreciated.

thanks,
sarge
Logged

Offline ricciardelli

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1004
  • Gender: Male
    • http://stevespages.com/page8.htm
Reuced 30-06 loads
« Reply #1 on: January 18, 2003, 04:20:57 PM »
2400 From 27.9 grains to 30.9 grains
 Winchester WLR Primer

AA-5744 From 26.0 grains to 27.0 grains
 Winchester WLR Primer

IMR-4227 From 29.0 grains to 31.0 grains
 Winchester WLR Primer

SR-4759 From 17.0 grains to 21.0 grains
 Winchester WLR Primer
Logged

Offline PaulS

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1120
Reuced 30-06 loads
« Reply #2 on: January 18, 2003, 09:35:11 PM »
You could always use the old standby:

LR primer and 12 grains of Unique

No wads, no problems! (just don't double charge)

PaulS
Logged
PaulS

Hodgdon, Lyman, Speer, Sierra, Hornady = reliable resources
so and so's pages on the internet = not reliable resources
Alway check loads you find on the internet against manuals.
NEVER exceed maximum listed loads.

Offline Sergeantlbt

  • Trade Count: (0)
  • Member
  • *
  • Posts: 20
Reuced 30-06 loads
« Reply #3 on: January 19, 2003, 02:43:16 AM »
Thanks for this input........

s
Logged
Pages: [1]   Go Up
« previous next »