« previous next »
Pages: [1]   Go Down

Author Topic: Misfires- CCI 200  (Read 474 times)

0 Members and 1 Guest are viewing this topic.

Offline smoky

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 434
    • http://www.cattletoday.com/sscc
Misfires- CCI 200
« on: August 11, 2004, 06:21:18 AM »
I have now had mis fires in two different guns with the CCI 200 primers.

One in a 7-08 ackley improved bolt action and the other in a T/C Encore .280.

Primers are showing signs of being hit but are not firing.

Other ammo works fine in the 7-08, have not yet tried anything else in the .280.

I have shot CCI 250 primers in my 7 Mag for years and years with never a misfire.  

Is this a case of a bad box of primers?

Any suggestions.

Thanks,

Smoky
Logged
Free men do not ask permission to bear arms.

Offline Questor

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 7075
Misfires- CCI 200
« Reply #1 on: August 11, 2004, 08:20:12 AM »
Must be some bad primers. That's very unusual, though. I did have a box of Winchester primers that had three misfires out of 500. Never had any before or since.
Logged
Safety first

Offline ricciardelli

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1004
  • Gender: Male
    • http://stevespages.com/page8.htm
Misfires- CCI 200
« Reply #2 on: August 11, 2004, 09:19:17 AM »
I have never had a CCI primer fail to fire, or Winchester or Remington.

The only failures I have ever had was with a box of Federal .44 Special factory loads...three out of 50!
Logged

Offline Pookee

  • Trade Count: (0)
  • Member
  • *
  • Posts: 44
Misfires- CCI 200
« Reply #3 on: August 12, 2004, 06:28:13 PM »
I have seen CCI missfire.
They are made harder then the other brands and require a strong hit.
Federal primers are the softest and I have never seen one missfire.
Logged

Offline skb2706

  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 1428
Misfires- CCI 200
« Reply #4 on: August 13, 2004, 03:07:50 AM »
Never had a CCI or any other brand fail to fire.....its possible that they are bad. Are they seated completely.....if not it is possible they won't fire.
Logged

Offline hogship

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 197
Misfires- CCI 200
« Reply #5 on: August 13, 2004, 06:58:08 PM »
I have never had a misfire, attrubutable to the primer itself, on my reloads.

I did have some misfires once when I got overly enthusiastic about uniforming primer pockets. These cases, I applied too much pressure when uniforming the pockets and some were a little too deep. The primers seated a few thousandths too deep and resulted in the misfires.

hog
Logged
Great, great, great, great, great grandson of a Revolutionary War Veteran.

--> Bill of RIGHTS, not bill of NEEDS <--

Visit my photo album, Vietnam 1968-69 at: http://www.picturetrail.com/taipan22alpha

Offline Gun Runner

  • Trade Count: (33)
  • Senior Member
  • *****
  • Posts: 1140
  • Gender: Male
Misfires- CCI 200
« Reply #6 on: August 13, 2004, 08:40:51 PM »
20 + years ago got a bunch of CCI primers for my 357, a lot of them would not fit in the primer pocket. CCI said they had  had a problem with their mach. and wound up with a large batch of primers that were just a bit oversized. They had me return the primers to my local gun shop where I had gotten them and they replaced the whole bunch.
I heard at one time that the primers that PMC was using were real hard.

Gun Runner
Logged
Pages: [1]   Go Up
« previous next »