« previous next »
Pages: [1]   Go Down

Author Topic: alcan al 7  (Read 1263 times)

0 Members and 1 Guest are viewing this topic.

Offline hubbard

  • Trade Count: (0)
  • Member
  • *
  • Posts: 50
alcan al 7
« on: January 13, 2003, 11:33:24 AM »
anyone ever used this in 45 colt. i found enough data in the lyman cast bullet manual to get me started but was just looking looking for someone with first hand experience.
Logged

Offline Dand

  • GBO Supporter
  • Trade Count: (35)
  • Senior Member
  • *****
  • Posts: 2974
AL 7
« Reply #1 on: January 13, 2003, 06:33:12 PM »
Never used AL 7 but I have used AL 8 in a 41 magnum and really liked it a lot and wish it was still available. Given that experience I'd definately try AL 7 if I had good load data.  You might try to locate an old version of Propellant Profiles by Wolde Publsihing - they might have some data and comentary.  I'll see if there is anything in the edition I have.

Good luck with it.
Logged
NRA Life

liberal Justice Hugo Black said, and I quote: "There are 'absolutes' in our Bill of Rights, and they were put there on purpose by men who knew what words meant and meant their prohibitions to be 'absolutes.'" End quote. From a recent article by Wayne LaPierre NRA

Offline jhm

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3169
al-7
« Reply #2 on: January 14, 2003, 04:47:01 AM »
JIMhubbard years ago I used al-7 for some 357 loads I was using and it gave me the vel. with a little less powder that was avail back then.  The Sierra manual I am looking at dated 1971 shows 5 loads with al-7 with 185 jhp going anywhere from 950fps to 1150fps if you need them let me know.   I dont have any al-7 left but I see on some of my notes I have written that it was a little dirty in firing, cant recall but it did seem to leave the weapon a little dirty. have fun. :D
Logged

Offline Siskiyou

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3417
  • Gender: Male
alcan al 7
« Reply #3 on: January 14, 2003, 04:17:40 PM »
As a kid it was the standard for heavy duck loads in the 12 and 16 gauage in my little cowtown.  I also loaded it a lot in the .357.  I liked it because it was cleaner then 2400 which left a lot of unburned grains.

I followed the lead of the Ultra hunter/NRA member in town.

Siskiyou
Logged
There is a learning process to effectively using a gps.  Do not throw your compass and map away!

Boycott: San Francisco, L.A., Oakland, and City of Sacramento, CA.

Offline BCB

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 928
alcan al 7
« Reply #4 on: January 16, 2003, 08:38:16 AM »
hubbard,

The Speer #9 manual shows loads for AL-7 for handguns other than the Ruger or the T/C Contender.  The loads appear to be almost identical to those listed for HS-6.  Lyman Cast Bullet Handbook also lists a couple of loads for it.  Pet Loads and Powder Profiles list nothing about AL-7 and the 45 Long Colt.  Good-luck…

Dand,

I recently purchased a 6-pound keg of AL-8 from Bartlett Surplus Powders.  I got it for a bit over $8.00/pound including shipping. (That was a full 6-keg order though)  I am using it in my 44 Magnum with the RCBS 44-250-K cast bullet with very good results.  Dang good powder.

BCB
Logged

Offline jhm

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3169
al-7
« Reply #5 on: January 16, 2003, 01:00:53 PM »
hubbard the speer #8 shows loads for the 45 colt as follows 200 gr speer semi-wadcutter 12.0 gr. 959 fps/ 13.5 gr. 1098   The 250 gr. cast gas check 11.0 gr. 900 fps/  12.0 gr. 988fps.   these are all old loads out of old manuals the speer # 10 DONT show any al-7 for the 45 colt and dand has already said it wasnt in the #9 hope the couple loads will help you to use the al-7 you have as I havent seen any in a long while. :D   JIM
Logged

Offline hubbard

  • Trade Count: (0)
  • Member
  • *
  • Posts: 50
alcan al 7
« Reply #6 on: January 16, 2003, 02:27:57 PM »
i'd like to thank everyone who took time to respond to my post. i ran upon this powder at a gunshow a while back. it's packed in the old style square tins which still look new. the powder looks good and still smells like any other new powder. the vendor had 4 lbs. of it and some sierra sillouette bullets he didn't want to take back home with him so we made a deal. i'm shooting a .357 and 45 colt with cast bullets and i'm looking forward to working up some new  loads. thanks again for the info.
Logged
Pages: [1]   Go Up
« previous next »