HELP!!!!

[myronman3]

barrel is stuck on the frame of my contender.  i know someone had the same problem before and someone else here helped them out.  what's the cure?

[myronman3]

i tried that and action still wont open.   it is a barrel i have never had on this frame.

[myronman3]

forums and i cant find how to get into them;  i figure that graybeard did away with them.  i am sure someone will know the solution before long.  it sure is nice to have so many willing people to help out at any given moment.  i think it is what i like most about the internet;  the way folks can use it to help one another.

[Ron LeClear]

Pull the trigger group and the barrel will let go.

Ron

[myronman3]

i looked in the old threads page 6 and there she was.... disassemble the trigger and i still had to use a screw driver to pop the hinge plate that keeps the action locked.  putting it back together now.

[Ron LeClear]

You will need to stone or file the bolt down.....or......remove the bolt from your other barrel and put it in the new barrel....that should work..

Ron

[myronman3]

all put back together and everything is well in myronland.  looking at the locking lug i can see a slight bit of difference.  i have another frame coming and will find out if that barrel works on that frame.   if it does,  i wont need to monkey with a thing.  thanks to all who offered help on such a short notice.   good night to all!

[myronman3]

if i have a problem using that barrel on the other frame.   i dont think i will.    thanks again.

[Dino32H&R]

Sounds like you are putting an old single-lug barrel on a new frame meant for the double-lug barrels, or vica-versa.

??