« previous next »
Pages: [1]   Go Down

Author Topic: Cylinder for SBH Bisley  (Read 533 times)

0 Members and 1 Guest are viewing this topic.

Offline hylander

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 360
  • Gender: Male
Cylinder for SBH Bisley
« on: August 21, 2004, 02:39:20 PM »
I have a SBH Bisley non-fluted .44 Mag.
My Cylinders are .433 which is to big.
Any know where I can get a Cylinder, short of sending it back to Ruger.
Logged
Failure is not an option
Placer County, Calif.

Offline Flint

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1053
sbh
« Reply #1 on: August 21, 2004, 08:33:18 PM »
Why do you think 433 is too big?  A cylinder throat should be .001 to .003 larger than the bullet/bore, which yours just is.  It is probably within Ruger's specs and they would see no reason to replace it.
Logged
Flint, SASS 976, NRA Life

Offline hylander

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 360
  • Gender: Male
Cylinder for SBH Bisley
« Reply #2 on: August 22, 2004, 06:29:53 AM »
Flint:
My bore is ,429 and cylinders .433 - .004 differance.
From what I am being told is that the cylinders should only be .001
or less bigger than the cast bullet being fired.
The biggest bullet I found is .431 leaving .002 gap.
I have been told the accuracy will suck and I will get a lot of leading.
I have not fired any cast yet so I have no personal exsperiance.
Logged
Failure is not an option
Placer County, Calif.

Offline oso45-70

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1918
  • Gender: Male
ruger firearms
« Reply #3 on: August 22, 2004, 06:59:10 AM »
hylander,
I really don't think that is going to make much difference in your accuracy.
If you are getting good accuracy out of your gun i wouldn't warry about it.
To tell you the truth i have never checked any of mine to see what the difference is,, Maybe i should but i'm afraid i might start worring about it .
Take care..........Joe.........
Logged
LIFE NRA BENEFACTOR
LEAA LIFE MEMBER
GOA MEMBER
CCKBA MEMBER
AF & AM
NAHC LIFE
NMSSA MEMBER
ATA MEMBER

Profanity is the crutch of a crippled brain

Offline BlkHawk73

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1501
  • Gender: Male
Cylinder for SBH Bisley
« Reply #4 on: August 22, 2004, 11:19:06 AM »
hylander,

   Head over to www.RugerForum.com and ask about this.  The knowedge over there will be more than enough to help you out.
Logged
"Never Surrender, Just Carry On."  - G.S.
Pages: [1]   Go Up
« previous next »