« previous next »
Pages: [1]   Go Down

Author Topic: cz triggers  (Read 1027 times)

0 Members and 1 Guest are viewing this topic.

Offline big k

  • Trade Count: (0)
  • Member
  • *
  • Posts: 65
cz triggers
« on: September 05, 2004, 05:06:58 PM »
just bought a 452 22lr siliouette i could not be happier still breaking in but want a trigger kit that will fix the creep hread about some but knot sure what to get.please help.



Gun control is using one bullet
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
cz triggers
« Reply #1 on: September 05, 2004, 06:15:18 PM »
Get one of Eric Brook's trigger kits.

www.cz452.com
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline big k

  • Trade Count: (0)
  • Member
  • *
  • Posts: 65
cz triggers
« Reply #2 on: September 06, 2004, 04:34:28 PM »
What about the lighter spring and adjustable sear are they worth it or should I not even bother
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
cz triggers
« Reply #3 on: September 06, 2004, 05:20:19 PM »
Try the Brook's kit first, $15 is little to spend on a trigger, and if it works, great! I tried it first, but the shims wouldn't work on mine to reduce creep, wouldn't stay cocked, but the spring did lighten the pull. I added the AS sear and it is wonderful now but it costs $56 or $66, depending on where you get it. You can also get a lighter spring from Brownell's.

http://webpages.charter.net/bradtompkins/prod02.htm


http://www.brownells.com/aspx/NS/store/ProductDetail.aspx?p=1678
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Questor

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 7075
cz triggers
« Reply #4 on: September 07, 2004, 05:36:44 AM »
You don't need a trigger kit to fix the creep. Just follow the manual's directions for adjusting the trigger. CZ triggers are excellent and do not need to be replaced with a kit.  However, they are typically maladjusted from the factory.  Use gun scrubber to degrease the threads of the adjustment screws, then use blue loc-tite to set them. You will only need to adjust one of the screws and it is not rocket science to do it.  Just a couple of screwdrivers are necessary.
Logged
Safety first

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
cz triggers
« Reply #5 on: September 07, 2004, 11:46:21 AM »
Quote from: Questor
You don't need a trigger kit to fix the creep. Just follow the manual's directions for adjusting the trigger. CZ triggers are excellent and do not need to be replaced with a kit.  However, they are typically maladjusted from the factory.  Use gun scrubber to degrease the threads of the adjustment screws, then use blue loc-tite to set them. You will only need to adjust one of the screws and it is not rocket science to do it.  Just a couple of screwdrivers are necessary.


The only adjustment on a CZ452 is for trigger pull weight, there is no adjustment to eliminate creep.


http://chatrifleclub.org/projects/cz452mods.html
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline big k

  • Trade Count: (0)
  • Member
  • *
  • Posts: 65
cz triggers
« Reply #6 on: September 07, 2004, 01:11:11 PM »
ya i don't think i am going to mess with the trigger enless i get a kit probaly goning to da what quickdtoo stated
Logged

Offline madmikeray

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 104
cz triggers
« Reply #7 on: September 07, 2004, 07:10:54 PM »
u can take out the adjustment screw out and take the spring and cut the coils little by little till it fills right to u. will lighten it even more greatly. u will be surprised at the pull!
Logged

Offline Questor

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 7075
cz triggers
« Reply #8 on: September 08, 2004, 02:50:26 AM »
That's strange. Both of mine have adjustments to remove creep, and they were both purchased within the past couple of years.
Logged
Safety first

Offline big k

  • Trade Count: (0)
  • Member
  • *
  • Posts: 65
cz triggers
« Reply #9 on: September 13, 2004, 11:29:03 AM »
JUST SENT OFF FOR MY BROOKS TRIGGER I WILL KEEP YA'LL POSTED
Logged

Offline unspellable

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 776
CZ rimfire trigger
« Reply #10 on: September 13, 2004, 12:31:01 PM »
I don't have  a manual.  Can I get one off the intrenet?  Can you elaborate on the adjustment?
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
cz triggers
« Reply #11 on: September 13, 2004, 02:06:47 PM »
There's a one line instruction for adjustment on page 20.

http://www.cz-usa.com/support.download.php?folder=support.dat/Instruction%20Manuals
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline chicborturkram

  • Trade Count: (0)
  • Member
  • *
  • Posts: 15
cz triggers
« Reply #12 on: September 17, 2004, 10:11:40 AM »
The 452s do not have any screws to adjust.  

You can purchase a replacement spring from any hardware store with a misc. spring assortment and it will cost you 50 cents tops.  Just take the original spring with you and match it to one with roughly the same internal hole size, you can cut to length if too long. I go to sears and grab a handful of springs and save them for various trigger jobs as they come along.  I have done this with 3 CZs and I just did a MAS 45 and it cut the pull in half.
Logged

Offline Questor

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 7075
cz triggers
« Reply #13 on: September 20, 2004, 04:15:21 AM »
It sounds like somebody's trying to sell unnecessary trigger kits.
Logged
Safety first

Offline big k

  • Trade Count: (0)
  • Member
  • *
  • Posts: 65
cz triggers
« Reply #14 on: September 20, 2004, 10:26:58 AM »
just got the kit putting it on i will keep ya'll posted
Logged

Offline big k

  • Trade Count: (0)
  • Member
  • *
  • Posts: 65
cz triggers
« Reply #15 on: September 20, 2004, 11:53:53 AM »
just got it on worth every penny and then some still have to go to the range thow
Logged
Pages: [1]   Go Up
« previous next »