Author Topic: Do you use Loc Tite on your scope mounts? (Read 650 times)

TheOpticZone · « **Reply #1 on:** November 10, 2004, 09:37:49 AM »

I do not. See no need in it.

quickdtoo · « **Reply #2 on:** November 10, 2004, 09:53:55 AM »

I use blue loctite on the base screws only, never on the ring screws.

Dave in WV · « **Reply #3 on:** November 10, 2004, 02:55:58 PM »

I use it on the base screws only. Clear fingernail polish works well too. Use lighter fluid to clean the screws and holes so you get a good bond. Green Loctite will work fine. If you use RED you will have to use heat to break the bond or you will strip the threads.

Redhawk1 · « **Reply #4 on:** November 10, 2004, 03:11:10 PM »

I use blue removable lock tight. It has never let me down and I have always been able to get it loose.

coyote 2 · « **Reply #5 on:** November 11, 2004, 06:02:01 AM »

I also use blue loctite on the base screws only - never - never - on the ring screws.

wolfie6929 · « **Reply #6 on:** November 11, 2004, 06:04:47 AM »

Quote from: Dave in WV

I use it on the base screws only. Clear fingernail polish works well too. Use lighter fluid to clean the screws and holes so you get a good bond. Green Loctite will work fine. If you use RED you will have to use heat to break the bond or you will strip the threads.

becareful if you use the high strength green it also must be heated to remove. locktight has diferent greens check you numbers or discription

Dave in WV · « **Reply #7 on:** November 11, 2004, 12:50:50 PM »

I didn't know that. Thanks.