« previous next »
Pages: [1]   Go Down

Author Topic: 45/70 come in two die set?  (Read 381 times)

0 Members and 2 Guests are viewing this topic.

Offline ba_50

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 222
  • Gender: Male
45/70 come in two die set?
« on: October 22, 2004, 10:19:51 AM »
Hi,

I bought some dies for a 45/70 that don't have any ID on them. One says 45/70FL and the other says 45/70DA. I see that most have 3 dies. Am I missing one? Thanks ba_50.
Logged

Offline ricciardelli

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1004
  • Gender: Male
    • http://stevespages.com/page8.htm
45/70 come in two die set?
« Reply #1 on: October 22, 2004, 10:27:11 AM »
Yes.

First die decaps and resizes, the second seats and crimps the bullet.
Logged

Offline ba_50

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 222
  • Gender: Male
45/70 dies
« Reply #2 on: October 22, 2004, 10:43:26 AM »
Does that mean yes, I am missing one or that I have a complete set? I think you mean it is a two die set. Thanks. ba_50
Logged

Offline Flash

  • Trade Count: (82)
  • Senior Member
  • *****
  • Posts: 2285
  • Gender: Male
45/70 come in two die set?
« Reply #3 on: October 22, 2004, 11:14:17 AM »
My Hornady die set has three dies. the 45/70 is a long straight walled case that needs expanding on the case mouth to keep it from colapsing when you seet the bullet. You should be ok with what you have, providing the full length sizer deprimes and the other die is a seating and crimping die. You somehow should get the case mouth belled, especially with cast loads.
Logged
What doesn't kill us, makes us stronger!

Offline ricciardelli

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1004
  • Gender: Male
    • http://stevespages.com/page8.htm
Re: 45/70 dies
« Reply #4 on: October 22, 2004, 06:34:41 PM »
Quote from: ba_50
Does that mean yes, I am missing one or that I have a complete set? I think you mean it is a two die set. Thanks. ba_50


Yes to both...

Some of the earlier die sets were 2-die sets, but all companies are now making the .45-70 set with 3 dies.

The "second" die is as explained above, it is used to bell the case mouth.

It would help if you knew who the manufacturer is...
Logged

Offline jackfish

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 215
45/70 come in two die set?
« Reply #5 on: October 23, 2004, 12:10:19 PM »
Buy a Lyman 'M' die for expanding the 45-70.  Doesn't beat brass up like a regular expander plug does.
Logged
You learn something new everyday whether you want to or not.
Pages: [1]   Go Up
« previous next »