Author Topic: casing sticks in handi help! (Read 543 times)

icthus153 · « **on:** November 23, 2004, 12:23:57 PM »

i know about the no oil in the chamber, but i was hunting in a driving rain today and had a chance to shoot A BIG doe. but i mmmmmmiiiiissssed. to make it worse she never even moved and my casing hung up so i could not back it up. besides the chamber being clean what do you think about notching the area above the ejector so you could at least get a pocket knife tip in there to help pull the shell out. i had no tools with me and had to go all the way home to remedy the prob. any thoughts on the notching?

riverjackal · « **Reply #1 on:** November 23, 2004, 01:02:05 PM »

Did you ever consider a short brass rod to drop down the barrell to knock it out ? They are easy to carry with ammo.

quickdtoo · « **Reply #2 on:** November 23, 2004, 01:05:59 PM »

Here's Fred M's solution and dang good one, I might add! Scroll down til ya find it....Lots of good stuff on the way down.. :wink:

http://www.angelfire.com/ma/ZERMEL/tweakultra.html

greenjeans · « **Reply #3 on:** November 23, 2004, 03:20:56 PM »

I carry a section of cleaning rod in my backback just in case.

Major · « **Reply #4 on:** November 23, 2004, 03:27:19 PM »

Like riverjackal said, a short brass rod to drop down the barrel works great. But, if you have the time and skill then go with Fred Ms suggestions by all means. That man knows his stuff.

icthus153 · « **Reply #5 on:** November 24, 2004, 01:03:23 PM »

thanks yall. your help is always timely and good!!!!