Author Topic: This may be a dumb question but please answer  (Read 689 times)

0 Members and 1 Guest are viewing this topic.

Offline BKS

  • Trade Count: (12)
  • Contributor
  • ***
  • Posts: 292
This may be a dumb question but please answer
« on: November 28, 2004, 08:05:10 AM »
When you buy a new muzzleloader barrel to add to your encore, do they come with the forend or do you have to buy that seperate??

Offline onesonek

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 714
  • Gender: Male
This may be a dumb question but please answ
« Reply #1 on: November 28, 2004, 11:13:49 AM »
seperate

Offline goose7856

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 398
This may be a dumb question but please answ
« Reply #2 on: November 28, 2004, 12:42:20 PM »
ok another newbie here.......how much does that forend cost, and is it necessary to buy one??

If I want to change the encore from lets say a 25-06 to a Muzzle loader, and then back again, would I need a different forearm each time I change the "type" of gun.......and would I need a different forarm if I went from say a 25-06 to a ..............300 mag?? (I am just using random calibers, but I am thinking about getting the muzzle loader and 25-06 for an encore :grin: )

Either way, what else is necessary to buy when you want to change the barrels out??!!

TIA
Good Hunting and Straight Shooting

Offline Yoda

  • Trade Count: (0)
  • Member
  • *
  • Posts: 6
This may be a dumb question but please answ
« Reply #3 on: November 28, 2004, 01:21:04 PM »
Most of the time they are sold seperate, Bullberry is sell a few Factory muzzleloader barrels for the Encore right now "With"  a Forearm For a pretty good price.http://www.bullberry.com/esale.html
 The Muzzleloader forearms will only fit the muzzleloader barrel, and as far as the rifle barrel forearms go, as long as you stay with the same barrel contour, one forearm will fit all.

Offline goose7856

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 398
This may be a dumb question but please answ
« Reply #4 on: November 28, 2004, 02:17:25 PM »
what is "barrel contour"?? Does that mean the same barrel width like .920, etc?? Meaning dont jump from a heavy barrel to a sporter barrel, etc??

TIA!! :D
Good Hunting and Straight Shooting

Offline Yoda

  • Trade Count: (0)
  • Member
  • *
  • Posts: 6
This may be a dumb question but please answ
« Reply #5 on: November 28, 2004, 02:32:46 PM »
Yep

Offline throttleman

  • Trade Count: (0)
  • Member
  • *
  • Posts: 70
This may be a dumb question but please answ
« Reply #6 on: November 29, 2004, 01:27:25 AM »
Hi,

I have a 209X45 G2 Contender.  When I bought my 45-70 barrel, the 209X45 forend fit the 45-70 barrel.  I only needed longer screws.  Good luck. :grin:

Offline BKS

  • Trade Count: (12)
  • Contributor
  • ***
  • Posts: 292
This may be a dumb question but please answ
« Reply #7 on: November 29, 2004, 03:44:26 AM »
Thanks for the replies.

Offline Lawful Larry

  • GBO Supporter
  • Trade Count: (0)
  • A Real Regular
  • *****
  • Posts: 849
  • Gender: Male
This may be a dumb question but please answ
« Reply #8 on: November 30, 2004, 03:45:45 AM »
Good Questions, Good Answers!!!!!!!!!!!!!!!!!!   :agree:
Just another voice in the crowd!!!