« previous next »
Pages: [1]   Go Down

Author Topic: S&W Scope base  (Read 1088 times)

0 Members and 1 Guest are viewing this topic.

Offline 95Road King

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 252
S&W Scope base
« on: December 07, 2004, 04:32:49 PM »
I have looked every where for a scope base for my S&W 686 (L-FRAME)
  I am looking for WEAVER base's. Here are Weaver part no.
  This is for a S&W NOT factory drilled & tapped.
     48642 Blue
     48634 Silver
  Any help???    Thank's. :?  :?
Logged

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26924
  • Gender: Male
S&W Scope base
« Reply #1 on: December 07, 2004, 05:07:39 PM »
Maybe. No promises but I seem to recall getting a base in error once for one of those that must be drilled and tapped in place of what I ordered which was for a gun that was factory D&T. I think I kept it and tossed it in a drawer. I'll look for it and see if it is what you are looking for and post back here if so.

I might not even find it tho and it might not be the exact base you are looking for. I honestly do not even recall the brand but it does seem like it was a Weaver.
Logged


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline 95Road King

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 252
S&W Base
« Reply #2 on: December 07, 2004, 05:13:56 PM »
GreyBeard:
        Thank's for replying and thank's for looking for that lost base.
  I love looking in my jumk drawers. Never know what you'll find!!!
Logged

Offline Stillhuntn

  • Trade Count: (0)
  • Member
  • *
  • Posts: 44
S&W Scope base
« Reply #3 on: December 08, 2004, 04:49:33 PM »
95Road King,
I found a Weaver base that will fit your 686.  It has the three screws, is blue and of no use to me.  The only draw back is that it is for a factory drilled and tapped gun.  However, if your gun has not been drilled and tapped then it should not be a problem.  I bought it for my model 57, but since it is D&T for a Redfield mount, the mounting holes do not line up.  Let me know if it will help you out.
Rick
Logged
Lord, grant me the ability to speak soft words today for tomorrow
I may have to chew up and swallow these words.

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26924
  • Gender: Male
S&W Scope base
« Reply #4 on: December 08, 2004, 07:19:03 PM »
Only Weaver I've found so far is a new 401S. I still think I have the one for guns not factory drilled and tapped but sure haven't run across it yet if so.
Logged


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline 95Road King

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 252
scope base
« Reply #5 on: December 08, 2004, 09:41:16 PM »
stillhuntin:
       Thank's , but I can get them and they won't work. The One screw hole straddle's the the factory rear site hlod down screw hole. I dopn't want to ruin that hole case I want to put open site back on. Hope this make's sense???  Thank's for the offer. :grin:  :?
Logged

Offline Tom C.

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 382
S&W Scope base
« Reply #6 on: December 09, 2004, 09:00:34 AM »
I think the Weaver style base you are looking for is the Warne base that uses the factory frame holes. Brownell's has it.
P/N 947-000-100
Logged
Tom

Offline 95Road King

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 252
Scope base
« Reply #7 on: December 09, 2004, 10:05:18 AM »
Tom:
     Thank's, I'll check the catalog at my local gun store.
Logged

Offline 95Road King

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 252
S&W Scope base
« Reply #8 on: December 09, 2004, 12:10:01 PM »
Tom C:
   I mis-read your post. My gun IS NOT drilled& tapped, that's why I can't use the base you mentioned.
    This is getting to be a pain in the butt!!! The only reason I want Weaver is because of price. I guess I can go get a 30 dollar something??? :?
Logged

Offline Greybeard

  • Administrator
  • Trade Count: (0)
  • A Real Regular
  • *****
  • Posts: 553
  • Gender: Male
    • Graybeard Outdoors
S&W Scope base
« Reply #9 on: December 09, 2004, 05:40:07 PM »
Quote
Thank's , but I can get them and they won't work. The One screw hole straddle's the the factory rear site hlod down screw hole. I dopn't want to ruin that hole case I want to put open site back on. Hope this make's sense???


Actually I guess it kinda don't. Why not just go ahead and get the base for D&T guns. Have the guy doing the D&T on yours match the factory D&T holes. Then order a proper screw from S&W for it if you ever want to put the sights back on.

I've still not found the base I sure thought I had anywhere. I know I never used it and sure can't recall returning it as the error was mine and they didn't accept returns if the customer got what was ordered. But I've looked about every where I know to look and not come across it.
Logged


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises

Offline 95Road King

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 252
scope base
« Reply #10 on: December 09, 2004, 07:34:01 PM »
Greybeard:
     Thank's for looking. I think i'll get one off Brownell's. They have one made by AIM-TECH that clamp's and boly's on. No D&T!!
  I have one on a K-38 and it work's very good. Didn't know they were still in business till yesterday. :grin:
Logged

Offline WNY_Whitetailer

  • Look at me I'm white and nerdy
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1828
  • Gender: Male
  • Working...
    • http://www.dec.state.ny.us/
S&W Scope base
« Reply #11 on: December 10, 2004, 06:21:24 AM »
I know that you are already looking at the Weaver scope rail but I am really happy with the Weigand Scope Mount that I purchased for my Ruger SBHH.  

Check out this link:
 http://www.jackweigand.com/swhpmnt.html

This is a no D&T mount for S&W revolvers manufactured after 92 but can be used on guns manufactured before 92 with a D&T.
Logged
Patience comes with age and You can't teach common sense

Offline 95Road King

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 252
S&W Scope base
« Reply #12 on: December 10, 2004, 07:38:55 AM »
WNY__Whitetailer
     
       I may order one today. Been looking at them on there web site.
                   Thank's :grin:
Logged

Offline WNY_Whitetailer

  • Look at me I'm white and nerdy
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1828
  • Gender: Male
  • Working...
    • http://www.dec.state.ny.us/
S&W Scope base
« Reply #13 on: December 17, 2004, 07:07:03 AM »
95,

Did you end up buying a Weigand scope mount?  Mine is rock solid...I was just wondering if you went for it and if so, how do you like it?

Later
Logged
Patience comes with age and You can't teach common sense

Offline 95Road King

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 252
Scope Base
« Reply #14 on: December 17, 2004, 07:48:52 AM »
I went with AIM-TECH mount. Clamp on type. Clamp's on top strap plus you use the 2 side plate screw's. Have one on a .38 Spcl. and has alway's worked good. Was worried about recoil with this type but decided to try it anyway. Just came back from the range. Shot 158 gr. bullet with 17 gr. of WW296. Shot 50 rds. Nothing moved. This was with a red dot scope. I like it plus the open sight's stay on. Will try 180 gr. bullet's tomorrow. :grin:  :grin:
Logged
Pages: [1]   Go Up
« previous next »