Author Topic: Handi 22-250  (Read 422 times)

0 Members and 1 Guest are viewing this topic.

Offline Casefiller

  • Trade Count: (0)
  • Member
  • *
  • Posts: 26
Handi 22-250
« on: December 30, 2004, 08:49:38 AM »
Hey guys New Poster here

Bought a Handi yesterday in 22-250. I am noticing some movement after the action is snapped shut.  Up  + down    Not much   Is this a normal thing with this rifle ?

Gonna take her back to the range tomorrow.  Shooting handloads  about  1" or smaller.  started at 50 yards.

Payed 80 bucks for her, already topped with a 3x9 scope and a case

Thanks,

C F

Offline MtJerry

  • Trade Count: (4)
  • A Real Regular
  • ****
  • Posts: 539
Re: Handi 22-250
« Reply #1 on: December 30, 2004, 09:42:54 AM »
Quote from: Casefiller

Payed 80 bucks for her, already topped with a 3x9 scope and a case

C F


WOW - - what a steal!!!!
:D

Offline single shot shooter

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 413
Handi 22-250
« Reply #2 on: December 30, 2004, 10:13:17 AM »
you got asteal, but there should be no "play" between the action and barrel.
Single Shot Shooter  :D
______________________________________________________________________
It aint what ya shoot, Its how well ya shoot it

Rossi, The Best In Workin Mans Single Shots

Offline nipprdog

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 138
Re: Handi 22-250
« Reply #3 on: December 30, 2004, 10:44:36 AM »
Quote from: Casefiller
I am noticing some movement after the action is snapped shut.  Up  + down    Not much   Is this a normal thing with this rifle ?


if we're reading this right, and your barrel moves a little after its closed,

DO NOT go to the range tomorrow!

something is wrong.  

could this be why you got it for $80?

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Handi 22-250
« Reply #4 on: December 30, 2004, 11:24:33 AM »
Welcome to GBO, Casefiller! :D  You either have an improperly fitted barrel or the frame is not an SB2 high pressure frame. Either way, I wouldn't shoot it at all until the looseness is fixed. If the inside of the frame in the barrel pivot area has a cast appearance, it's more than likely an SB1 shotgun frame, but that's not a definitive way to tell. The best way is to call or email H&R with the serial number of the frame, they will tell you what barrels can be safely fitted/used on that frame. If they tell you only shotgun barrels can be fitted or the frame is too old for them to fit barrels, you may need to seek a gunsmith's advice. Good luck!

hr1871@hr1871.com

(978) 630-8220
"Always do right, this will gratify some and astonish the rest" -  Mark Twain