Author Topic: Anybody shooting a 7.7 Arisaka?  (Read 340 times)

0 Members and 1 Guest are viewing this topic.

Offline papajohn428

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 755
Anybody shooting a 7.7 Arisaka?
« on: December 26, 2004, 11:37:04 AM »
Hi All,
About 25 years ago I picked up an Arisaka rifle from a fellow cop, paid all of $55 for it and a box of Norma ammo.  The forend was all busted up and I had to cut it down to salvage it, but I left the barrel as is, goofy sights and all.  I spent several years playing with it, and then moved on to other projects.  But the last time I benched it, I shot a 3-shot 100-yard group of just under an inch, open sights and all.  I bet I couldn't do that now with a 12X scope, my eyes have gone downhill in the last 25 years.  I do remember using 4895 and Hornady 130 grain bullets, which somehow shot better than the 150 and 180 grainers.  I want to give it to my son pretty soon, but I think the next time I go to the range, I'll see if I can hit anything with it.

I remember reading Ken Waters' warning about not re-forming '06 brass after I had already tried it, it never caused me any problems.  He said the chamber in the Arisaka had a smaller base diameter, but mine worked fine.   My gun was clearly made toward the end of WWII, wooden buttplate and very crudely finished, no dust cover, Chrysanthemum ground off.  But I sure had fun with it, learning to reload!

Papajohn
If you can shoot home invaders, why can't you shoot Homeland Invaders?

Offline alpini

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 125
Anybody shooting a 7.7 Arisaka?
« Reply #1 on: December 27, 2004, 12:33:54 PM »
I have not shot mine in quite a while.  I do remember using 44grn of IMR 4895 and those Hornady 150s .312 spires. I think the best I could do was about inch and a half groups.
    I guess I was supprised at that because the dang trigger seemed to have so much take-up while trying to maintain proper sight picture. I used  Norma brass.  I've not tried any reformed '06 but I should try sometime.
   I still have the rifle, a mid war 6th series. Now you got me wanting to go check it out again with some new loads.

Offline Japlmg

  • Trade Count: (0)
  • Member
  • *
  • Posts: 28
7.7x58 Japanese ammo
« Reply #2 on: January 08, 2005, 10:40:36 AM »
Graf's is now importing newly made boxer primed, non corrosive  ammo for both the 6.5 and 7.7 Japanese rifles. The price to dealers is around $16 per box, and unloaded brass is about $30 per 100.
Regards, Gregg