« previous next »
Pages: [1]   Go Down

Author Topic: Sending Handi .223 to NEF for 50 cal. ML barrel help?  (Read 775 times)

0 Members and 1 Guest are viewing this topic.

Offline mrlizzzard

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 211
Sending Handi .223 to NEF for 50 cal. ML barrel help?
« on: January 16, 2005, 02:07:20 AM »
This isn't really a poll but I'll sure appreciate the advice.What ML barrel would YOU order for a blued/wood Handi?

thx,
lizzzard
Logged

Offline jbtazgrabber

  • Trade Count: (20)
  • A Real Regular
  • ****
  • Posts: 749
MM
« Reply #1 on: January 16, 2005, 05:53:16 AM »
I GOT THE BLACK/BLUE ON MY WOOD ...STOCK IM GOING TO GET THE BETTER HALF A SIDEKICKIN S/S BUT IT ONLY COMES WITH PLASTIC STOCKS :cry: ILOVE THE S/S BARRELS IN BLACK POWDER BECAUSE ITS SLOWER TO RUST,BUT I HAVE NO PROBLEM WITH MY BLUE yet....i wouldGET THE STAINLESS IN 24 IN. BUT IF I WAS EVER TO HUNT LONGER RANGE I WOULD GET THE MAG..BARREL JUST MY THOUGHTS.....JB
Logged

Offline tscott

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 561
Sending Handi .223 to NEF for 50 cal. ML ba
« Reply #2 on: January 16, 2005, 09:56:07 AM »
I would order a spare breech plug, and ask that the breech plug is left out.
I would then wire brush both breech plugs extensively, as well as the barrel breech plug threads. In seating a plug I would screw all the way in, and then back it off slightly. Any good plug grease works well.
Each new barrel I got back....the biggest pain in the tail was skinning my knuckles and swearing over pullin' the plug.
Logged

Offline mrlizzzard

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 211
Sending Handi .223 to NEF for 50 cal. ML ba
« Reply #3 on: January 16, 2005, 10:27:38 AM »
tscott thanks that's a good point
lizzzard
Logged

Offline ogo

  • Trade Count: (0)
  • Member
  • *
  • Posts: 97
Sending Handi .223 to NEF for 50 cal. ML ba
« Reply #4 on: January 16, 2005, 02:31:23 PM »
The first thing i did when i got  my huntsman was to make a breech plug tool from a 3/8" sparkplug scocket, work's great.There is a thread on this forum somewhere with all the info, mater of fact, everthing,I say everthing you want  to know about the Huntsman is on this forum.onest injun*************ogo
Logged

Offline Busta

  • GBO Supporter
  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 2586
  • Gender: Male
Sending Handi .223 to NEF for 50 cal. ML ba
« Reply #5 on: January 16, 2005, 04:06:01 PM »
ogo,

This might be what your looking for. I came up with the socket idea and Perklo has another way of permanently doing it in this thread as well. My pictures leave a lot to be desired, but I think they will get the idea. This tool works like a dream as compared to the "knuckle buster" as supplied. It sure would not take H&R/NEF much to make this tool better. Here it is with pics.

http://www.graybeardoutdoors.com/phpbb2/viewtopic.php?t=28961&highlight=
Logged
U.S.A.F. Veteran
NRA Life Member

Offline ogo

  • Trade Count: (0)
  • Member
  • *
  • Posts: 97
Sending Handi .223 to NEF for 50 cal. ML ba
« Reply #6 on: January 17, 2005, 08:13:35 AM »
Busta'yote, yep that be it. Like I said everthing you need to know about the Huntsman and a lot of other stuff is right here on these fourm's,GBO great place**************ogo
Logged
Pages: [1]   Go Up
« previous next »