Poll

What do you use for sights on your Huntsman, Sidekick?

Total Members Voted: 4

Voting closed: November 26, 2004, 02:46:26 AM

« previous next »
Pages: [1]   Go Down

Author Topic: Who uses what? Scope, dot, iron sights, or peep!  (Read 1271 times)

0 Members and 1 Guest are viewing this topic.

Offline raynor

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 199
Who uses what? Scope, dot, iron sights, or peep!
« on: November 26, 2004, 02:46:26 AM »
Just curious what the numbers are for people using sights, versus scopes and dots. I use a Williams peep with the stock front fiber optic.
Logged

Offline WNY_Whitetailer

  • Look at me I'm white and nerdy
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1828
  • Gender: Male
  • Working...
    • http://www.dec.state.ny.us/
Who uses what? Scope, dot, iron sights, or
« Reply #1 on: December 02, 2004, 06:54:54 AM »
Bushnell Banner 3-9x40 scope mounted on Millett High Rings...In all actuality I have never moved the scope from its 3x setting.  Maybe a fixed 2.5x scope would have been better.
Logged
Patience comes with age and You can't teach common sense

Offline rmtaylor

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 231
Who uses what? Scope, dot, iron sights, or
« Reply #2 on: December 02, 2004, 01:42:15 PM »
I answered the question scope but actually I use both. I have see thru scope mounts with a 3x9-32 scope. The sights are dead on at 50 and the scope it 1.5 inchs high at 100.

Richard
Logged
NRA Member
Living in Michigan but  "MY Home's in ALABAMA"

Offline 243tom

  • Trade Count: (13)
  • Avid Poster
  • **
  • Posts: 161
  • Gender: Male
Who uses what? Scope, dot, iron sights, or
« Reply #3 on: December 03, 2004, 01:15:40 PM »
I got my new Sidekick and never even fired it using open sights. I had a 4x BSA laying around without a home,,,and I was determined about keeping a "low budget" good shooting gun. So after a rail and hammer extension from H&R and a set of high Weaver rings,,I sighted in at 75 yds. and am totally confident in my inexpensive set-up.
Using two 50gr. pellets of 777 and 295gr. PB or 240gr. xtp sabots....the gun will put bullets in a 3 inch shoot n see target....off a bench.  So I got to do my part in the field.
Logged

Offline offhand35

  • Trade Count: (74)
  • Contributor
  • ***
  • Posts: 433
  • Gender: Male
Who uses what? Scope, dot, iron sights, or
« Reply #4 on: December 11, 2004, 12:58:39 PM »
Hello, Raynor! Which Williams peep/receiiver sight are you using?
I see a model WGRS-HR in the Brownells cat. It says that drill & tap is required. Would the scope mount holes work?
Or, are you using a FoolProof type? What model #?
Logged
Squirrel.......the OTHER dark meat.....!

Offline mangulator

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 477
Who uses what? Scope, dot, iron sights, or
« Reply #5 on: January 14, 2005, 04:42:10 PM »
I use a BSA red dot scope on my Huntsman muzzleloader with 100 grains of pyrodex pellets and a 240 grain XTP mag sabot. I found this is a great load and is a quick handling combination for spot and stock of mule deer in the area I hunt.
Logged

Offline DGrig

  • Trade Count: (1)
  • Member
  • *
  • Posts: 98
Who uses what? Scope, dot, iron sights, or
« Reply #6 on: January 21, 2005, 05:47:12 AM »
I have a 2-7 Leupold using Burris quick detachable Zee rings.  I like to get the optics off a ML for cleaning if possible.  G
Logged

Offline redpep

  • Trade Count: (0)
  • Member
  • *
  • Posts: 30
Who uses what? Scope, dot, iron sights, or
« Reply #7 on: January 22, 2005, 03:00:57 AM »
Bushnell Banner DD 1.5x4.5x32 wide angle on Burris med rings, Am thinking about trying some Burris high rings for sight clearance.
Logged
Pages: [1]   Go Up
« previous next »