Author Topic: Exposed Nipple... (Read 511 times)

Wolfe · « **on:** January 30, 2005, 07:38:26 AM »

Which modern inline designs have an exposed nipple.

In Washington state the nipple must be exposed to the elements and use a standard musket cap ignition system.

I know the remington 700ml qualifies. Any others?

quickdtoo · « **Reply #1 on:** January 30, 2005, 08:31:06 AM »

Wolfe, I shoot a couple TC Black Diamonds using the musket nipple that comes with the rifle and RWS flangeless musket caps or you can cut the flange off the regular musket caps which I did for a while until I found the flangeless RWS at www.DNRsports.com for $2.48 a hundred and no hazmat.

I slip a piece of 1/4" surgical tubing over the cap to waterproof it when hunting, it also keeps the cap in place when the striker is back and the safety is on, don't like to hunt with the striker against the cap.

William Gunsights has some great prices on inlines, best I've seen in a while....

RWS Flangeless Musket Caps

tscott · « **Reply #2 on:** January 30, 2005, 10:02:21 AM »

Does anyone else use a little dab of flux on the side of the nipple to hold the cap in place?

quickdtoo · « **Reply #3 on:** January 30, 2005, 10:50:55 AM »

I've used sno-seal to seal a #11 cap, works well, just a bit of a hassle to smear it on. The surgical tubing works extremely well! Someone makes something called a caplocker but it's not legal in Washington, the surgical tubing is.