Author Topic: Question about reading materials for a beginner  (Read 259 times)

0 Members and 1 Guest are viewing this topic.

Offline Jeffery8mm

  • Trade Count: (59)
  • A Real Regular
  • ****
  • Posts: 533
Question about reading materials for a beginner
« on: February 11, 2005, 06:07:11 AM »
Am am new to relaoding in the fact that I recently inherited a complete RCBS setup, complete with dies and brass and bullets.  I need some reading material!!!  Is the NRA Guide To Relaoding a good starting point??
Also, I have seen some booklets that deal with 1 specific caliber such as .308, where are these available from.  Any suggestion will be helpful and appreciated!!

Jeff
With proper care and maintenance the human body will last a lifetime! :)

Offline Questor

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 7075
Question about reading materials for a begi
« Reply #1 on: February 11, 2005, 06:41:51 AM »
Since you have RCBS equipment, I recommend the Speer reloading manual, which has specific instructions for using RCBS equipment.  If you have a favorite brand of bullets, you may also want to buy their reloading manual.  Reloading is basically just following a recipe in cookbook form. There's not much to it.  It is important to check your load data against two different manuals to make sure that they are similar. This is a safety check against typos.  I personally like to use the Speer manual and the Loadbooks USA books for specific calibers. Loadbooks each have load data for only one cartridge, and the data is copied from the manuals of all the major bullet and powder manufacturers.  I also use the Nosler manual because I have been using Nosler bullets lately.
Safety first

Offline skb2706

  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 1428
Question about reading materials for a begi
« Reply #2 on: February 11, 2005, 11:07:22 AM »
You can buy Loadbooks from Midway, Midsouth Shooters Supply, Natchez, Graf and sons...caliber specific. You really can't have too many reloading manuals...it can be kinda confusing because each have slightly different limits. You will understand why if you read these loading books as most are a wealth of info.
Lucky you.......wish someone would have left me a setup...I could have saved thousands of $$

Offline Jeffery8mm

  • Trade Count: (59)
  • A Real Regular
  • ****
  • Posts: 533
Question about reading materials for a begi
« Reply #3 on: February 11, 2005, 11:52:18 AM »
Thanks guys.  I will invest in these BEFORE I get too far into this.  I am one to over research something I guess, but it is better to be safe than sorry!!
Thanks again

Jeff
With proper care and maintenance the human body will last a lifetime! :)