« previous next »
Pages: [1]   Go Down

Author Topic: clays powder for 45acp loads?  (Read 1344 times)

0 Members and 1 Guest are viewing this topic.

Offline shaner

  • GBO Supporter
  • Trade Count: (66)
  • Senior Member
  • *****
  • Posts: 2057
  • Gender: Male
clays powder for 45acp loads?
« on: November 22, 2004, 03:33:16 PM »
wantingto use clays powder  under 200 & 180 grain  hard cast lead bullets ? anyone used  this,, iam figuring around 5grains?  any help here?
ive been using 231 , and have used unigue  but my gun seems to crud up after 200+ rounds
Logged

Offline Don Dick

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 143
clays powder for 45acp loads?
« Reply #1 on: February 05, 2005, 03:53:46 PM »
Hogdon`s web page lists some loads may want to check there.
5.0 is over max for both the 185 and 200 gr check, for proper load data check in a reloading manual or there web site.  Load safe, shoot safe.
Logged
Some people come into our lives and quickly go.  Some stay awhile and leave footprints on our hearts.  And we are never.  Ever the same.   Authur unknown.  In memory of my son Jonathan.

Offline deerstalker

  • Trade Count: (0)
  • Member
  • *
  • Posts: 52
Clays
« Reply #2 on: February 06, 2005, 02:29:09 AM »
I've been useing Clays for years. My load, in my Colt is 4 gr. under a 200 gr. swc.. It's clean burning, and not a lot of re-coil for target shooting. :D
Logged

Offline Questor

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 7075
clays powder for 45acp loads?
« Reply #3 on: February 07, 2005, 03:55:44 AM »
Clays is an excellent powder, but it's not cleaner burning than 231. Try switching to Winchester WLP primers. They're a little hotter and they tend to keep things cleaner longer.
Logged
Safety first

Offline Steve 48

  • Trade Count: (0)
  • Member
  • *
  • Posts: 35
clays powder for 45acp loads?
« Reply #4 on: February 17, 2005, 08:18:05 AM »
I use 4.3 grs of clays with a 200 gr Leadheads bullet and get 1 inch groups from my Springfield. 5 grs in a larger bullet weight would be too much and may cause some damage to you and your gun. Ask me, I done it once. Steve 48
Logged

Offline vinconco

  • Trade Count: (0)
  • Member
  • *
  • Posts: 83
clays powder for 45acp loads?
« Reply #5 on: March 01, 2005, 03:57:31 PM »
Clays is a fast powder and you need to be careful.  I like it because it produces a lower felt recoil.   I'm not near my data now and will not trust to memory but I load a 200 SWCL to 875fps.  I have had good luck with FED LP primers.
Logged

Offline jakes10mm

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 199
Titegroup
« Reply #6 on: March 08, 2005, 06:46:02 AM »
I used Clays for awhile in competition, but eventually ended up with Titegroup as my 45acp powder after going through Clays, W231, and WST.  Liked Clays, but seemed to have a little more recoil than the Titegroup.  If I remeber correctly, Clays produces pretty high pressure rounds (but check the Hodgdon site to make sure).
Logged

Offline vinconco

  • Trade Count: (0)
  • Member
  • *
  • Posts: 83
clays powder for 45acp loads?
« Reply #7 on: March 08, 2005, 02:04:49 PM »
jakes10mm:
   So Titegroup has less felt recoil than Clays... good to know.     Been through all the others too.

vin
Logged
Pages: [1]   Go Up
« previous next »