Author Topic: rcbs mold handles and lyman handles  (Read 977 times)

0 Members and 1 Guest are viewing this topic.

Offline myronman3

  • Moderator
  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 4837
  • Gender: Male
rcbs mold handles and lyman handles
« on: March 01, 2005, 02:43:01 PM »
o.k. kids,  those of you with both, i need to know if rcbs handles fit a lyman two cavity mold.   what's the word?

Offline LAH

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 320
rcbs mold handles and lyman handles
« Reply #1 on: March 01, 2005, 03:09:23 PM »
Believe so. I've had so many combo's I can't quite remember but I think the Lyman 2 cavity moulds fit RCBS handles.
Joshua 1:9

Offline Leadlum

  • Trade Count: (0)
  • Member
  • *
  • Posts: 74
rcbs mold handles and lyman handles
« Reply #2 on: March 01, 2005, 04:51:22 PM »
My lyman handles fit my RCBS molds good. They should go the other way?
US ARMY 78-81
3rd Inf Div 2/15
Wildflecken,Germany

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18263
rcbs mold handles and lyman handles
« Reply #3 on: March 02, 2005, 12:41:27 AM »
lyman molds will work with rcbs handles but rcbs molds wont work with lyman handles.
blue lives matter

Offline Leadlum

  • Trade Count: (0)
  • Member
  • *
  • Posts: 74
rcbs mold handles and lyman handles
« Reply #4 on: March 02, 2005, 06:03:16 AM »
Sorry about my post; I was wrong. Loyde Smale is right. I went and checked my handles this morning, I do have RCBS handles. Thought they were lymans.
US ARMY 78-81
3rd Inf Div 2/15
Wildflecken,Germany

Offline myronman3

  • Moderator
  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 4837
  • Gender: Male
rcbs mold handles and lyman handles
« Reply #5 on: March 02, 2005, 11:11:40 AM »
thanks.  i am putting an order in to midway and they have the rcbs on sale cheaper than the lyman.   being the tightwad i am,  i am always happy to save a buck.

Offline DPRinks

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 166
Handles
« Reply #6 on: March 02, 2005, 05:30:25 PM »
Why not just buy the Lee at less than 1/2 the price, a very little grinding and they will fit either Lyman or RCBS molds.
Took me less than 5 minutes to do it.
Don :grin:
D. Rinks