« previous next »
Pages: [1]   Go Down

Author Topic: Accuracy trick  (Read 1050 times)

0 Members and 1 Guest are viewing this topic.

Offline rocky_taco

  • Trade Count: (0)
  • Member
  • *
  • Posts: 91
Accuracy trick
« on: March 02, 2005, 05:00:15 PM »
I read something somewhere about using aluminum tape to keep the hinge pin from spinning.  Just wondered if anyone has tried this and if it helped with accuracy.
Logged

Offline abhound

  • Trade Count: (0)
  • Member
  • *
  • Posts: 27
Accuracy trick
« Reply #1 on: March 02, 2005, 05:11:52 PM »
I don't think it's so much for keeping the pin from spinning, but to keep it from sliding side to side.  Especially if you have allot of play in your forearm slot, the pin could actually slip out of one side of the frame.  Myself, I use an oversize hinge pin that I have to tap in place, so I don't think it would do much good for me.
Logged
No, I'm not you typical Californian.  :sniper:

Offline Keith L

  • Moderator
  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 3781
Accuracy trick
« Reply #2 on: March 03, 2005, 12:52:30 AM »
Are you shooting without a forend?  None of mine have enough room to allow a pin to slip out of place.
Logged
"Beer is proof that God loves us and wants us to be happy."  Benjamin Franklin

Offline hunter58

  • Trade Count: (0)
  • Member
  • *
  • Posts: 31
Tape
« Reply #3 on: March 03, 2005, 02:29:07 AM »
If you have been looking at the PR bullet website, thats where you seen this article.
Logged

Offline rocky_taco

  • Trade Count: (0)
  • Member
  • *
  • Posts: 91
Re: Tape
« Reply #4 on: March 03, 2005, 12:37:56 PM »
Quote from: hunter58
If you have been looking at the PR bullet website, thats where you seen this article.


Do you have a link.  I can't find the article I read.

Thanks
Logged

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Accuracy trick
« Reply #5 on: March 03, 2005, 04:50:51 PM »
Logged
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Accuracy trick
« Reply #6 on: March 03, 2005, 04:57:52 PM »
Also there is a ton of information on that site.  :D
Logged
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA
Pages: [1]   Go Up
« previous next »