« previous next »
Pages: [1]   Go Down

Author Topic: Rebarreling Ruger K77  (Read 398 times)

0 Members and 2 Guests are viewing this topic.

Offline hans g./UpS

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 273
Rebarreling Ruger K77
« on: March 08, 2005, 09:13:26 AM »
How easy,how expensive is it to have a Ruger K77 rebarreled?
Being a southpaw,my caliber choices are severely limited.
I'm pondering about having a Ruger stainless lefthand mdl77 rebarreled from 30/06[or 25/06] to 35 Whelen.I'd be interested in going to a 24"stainless barrel with iron sights.
Thanks.
Logged

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
Rebarreling Ruger K77
« Reply #1 on: March 08, 2005, 09:42:06 AM »
The Rugers are no harder to rebarrel than a mauser or M70 and a bit less trouble than the M700..  The Whelan is a great choice,, I suspect the 30-06 will be easiest to find and will work just great for a Whelan.
Logged
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline jhm

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3169
Rebarreling Ruger K77
« Reply #2 on: March 08, 2005, 02:19:48 PM »
All the measurements are the same on the whelan and the 30-06, barrel change should be all you are looking at. :D    JIM
Logged

Offline Alaninga

  • Trade Count: (0)
  • Member
  • *
  • Posts: 39
easy!
« Reply #3 on: March 09, 2005, 02:32:12 AM »
Rugers are probably THE easiest to rebarrel. I have one that is still a switch barrel, a short action MarkII stainless. Right now it's a .250 Savage Improved. Other barrels are 22-250, 243, 308, 7.62x39 [works just 'ok' with the smaller rim diameter on extraction]. Thought about fitting a .270 Win barrel as I have an Ackley Improved [.270] reamer. Would have to be a single shot in the short action.
"Logic only occasionally enters the equasion!"
Alan in GA.
Logged
Pages: [1]   Go Up
« previous next »