« previous next »
Pages: [1]   Go Down

Author Topic: 32 Win. Special/Cast loads  (Read 315 times)

0 Members and 1 Guest are viewing this topic.

Offline DonT

  • Trade Count: (6)
  • Contributor
  • ***
  • Posts: 282
32 Win. Special/Cast loads
« on: March 22, 2005, 03:10:22 AM »
Looking for some load information for the .32 Winchester Special.

I primarily plink and these would be used in a very light Martini Cadet that was converted to 32 Win Spec. and I would prefer something that won't kick the stuffing out of you like factory ammo. :(

I have found a source for .323 cast FP bullets just need some loading data for target loads (100 yds or less) and maybe a whitetail deer load.


Thanks in advance!
DonT :D
Logged

Offline jh45gun

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4992
32 Win. Special/Cast loads
« Reply #1 on: March 22, 2005, 09:10:18 AM »
Except for the larger in diameter bullet the Win 32 special is a ballistic twin to the 30/30 any cast or jacketed load you find for the 30/30 will work for the 32 special. Jim
Logged
Said I never had much use for one, never said I didn't know how to use it.

Offline Vern Humphrey

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 221
32 Win. Special/Cast loads
« Reply #2 on: March 22, 2005, 11:19:21 AM »
With cast bullets I've had very good luck with standard starting loads for jacketed bullets in the .30-30.  You can back off a couple of grains, and still get good accuracy.  A plus is you don't have a lot of space and only a tiny bit of powder in these loads, so they aren't position-sensitive.
Logged
Pages: [1]   Go Up
« previous next »