Author Topic: 270 reloads  (Read 1596 times)

0 Members and 1 Guest are viewing this topic.

Offline bigchast1

  • Trade Count: (0)
  • Member
  • *
  • Posts: 81
270 reloads
« on: March 22, 2005, 01:25:02 PM »
What are some good deer to elk loads to start with. Also what is a real, really, really really good target load, 2 inch or better at 300yds for egg shoot. Thanks guys!!!!!!!!

Offline RaySendero

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1064
  • Gender: Male
Re: 270 reloads
« Reply #1 on: March 22, 2005, 03:39:19 PM »
Quote from: bigchast1
What are some good deer to elk loads to start with. Also what is a real, really, really really good target load, 2 inch or better at 300yds for egg shoot. Thanks guys!!!!!!!!


bc1,

Deer, elk or eggs = 150 grain Sierra GameKing over IMR-4350!

SEE!



Call pulled that one on the right. :D
    Ray

Offline earschplitinloudenboomer

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 145
270 loads
« Reply #2 on: March 22, 2005, 07:34:12 PM »
Raysendero;

  Yessir...I'd take a dollars worth of that!!!

Offline John R.

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 845
270 reloads
« Reply #3 on: March 24, 2005, 05:20:34 AM »
Try 55 grs. of IMR 4350 with any good 130 gr. bullet. I use the 130 Partition or the Hornady Interbond. Both shoot 3/4" @ 100 yds. If your hunting elk you probably will want to go to the 150 gr. bullet.

Offline razmuz

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 271
270 LOADS
« Reply #4 on: April 05, 2005, 12:51:55 PM »
Hard question.  The 270 will shoot great with numerous powders.  Each rifle is different.  However, one load I shoot has shot good in several different rifles.  People have borrowed bullets from me while hunting and the load always did a good job for them:

54 gr of W-760 over 130 gr speir @ 3.340 col

Offline lowertroll

  • Trade Count: (0)
  • Member
  • *
  • Posts: 33
    • timfolt@yahoo.com
270 reloads
« Reply #5 on: April 07, 2005, 10:07:24 AM »
IMR 44350 is a good powder, H 4831 a better powder, and RL22 the best powder in my 270.  Shoot a lot with Nosler BTs, when go hunting use Solid Base or Partitions. I have killed multiple deer and elk with the above combos, including a couple 5x5 bulls with the 150 Solid Base, RL22 and Fed 210Match primers. The BTs probably work for deer, but I always use the Solid Base or Partitions for hunting.
At Khe Sahn a sign read "For those who fought for it, life has a flavor the protected never knew".

Offline drdougrx

  • GBO Supporter
  • Trade Count: (10)
  • Senior Member
  • *****
  • Posts: 3212
270 reloads
« Reply #6 on: April 08, 2005, 11:49:03 AM »
Hi,

I use 58gr RL-22, 150gr Noler BT or Part, CCI LR primers and Win brass.  I get 2920 FPS and 1 1/4" groups.

Good hunting!

Doug
If you like, please enjoy some of my hunt pics at:

http://public.fotki.com/DrDougRx

If you leave a comment, please leave your GB screen name so that I can reply back!

Offline razmuz

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 271
Mr. DRDOUGRN
« Reply #7 on: April 08, 2005, 01:08:25 PM »
Where did you kill that Boar.  I've killed Arkansas hogs many times, but nothing with a snout like that.  By the way, I think I've found out what powder Hornady uses in their 270 Custom loads.  58.5 H-4831 with 130 Interlock.  They get it in "GREAT" big lots so it may not be the same, but close. :shock:

Offline jro45

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1923
270 reloads
« Reply #8 on: April 12, 2005, 04:50:33 AM »
That target is some good shooting at long range with one flier. :D

Offline magnum308

  • Trade Count: (0)
  • Member
  • *
  • Posts: 77
  • Gender: Male
270 reloads
« Reply #9 on: April 12, 2005, 01:15:40 PM »
Quote from: John R.
Try 55 grs. of IMR 4350 with any good 130 gr. bullet. I use the 130 Partition or the Hornady Interbond. Both shoot 3/4" @ 100 yds......


John R,

Have you ever chronographed this load? If so, what velocities are you getting and what is the length of the barrel of your rifle?

Cheers & God bless,
Magnum308
Life's too short to hunt with an ugly rifle

Offline drdougrx

  • GBO Supporter
  • Trade Count: (10)
  • Senior Member
  • *****
  • Posts: 3212
270 reloads
« Reply #10 on: April 13, 2005, 02:59:06 PM »
Hey RAZMUZ,

I killed that hog on a preserve in NY.  I preserve hunt when I can't a fit a real hunt in.  It weighed 318lbs before it was dressed and had a 12.5" snout (tear duct to nose tip measured accurately per order of the taxidermist) and 4.5" of teeth showing (unbroken) on each side.


Thanks for asking.  I'll put some pics up on a pic site I use and then post the address so you can see more pics if you like.

Regards.

Doug
If you like, please enjoy some of my hunt pics at:

http://public.fotki.com/DrDougRx

If you leave a comment, please leave your GB screen name so that I can reply back!

Offline razmuz

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 271
SHOW US SOME PICTURES
« Reply #11 on: April 14, 2005, 04:35:04 AM »
One more question.  Is that hog from another country?

Offline jro45

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1923
270 reloads
« Reply #12 on: April 14, 2005, 07:35:09 AM »
Thats a nice boar. I shot one in N.C. his teeth were 11/4 " he weighted 200lbs.

Offline drdougrx

  • GBO Supporter
  • Trade Count: (10)
  • Senior Member
  • *****
  • Posts: 3212
270 reloads
« Reply #13 on: April 14, 2005, 01:36:52 PM »
Hi All.

No...er...yes...I guess so.  It's from some game raising operation in Canada I expect.  The outfitter had more than 300 hogs and 5 were over 300lbs.  The other 4 were pretty piggy looking and fat, big jowels, fat gut, short snout.  This guy was...well....pretty boar like.  I've uploaded more pics of him under Old Stone Fence Hunting 2004.

http://public.fotki.com/DrDougRx/

I will say the 45/70 is almost perfect for this kinda hunting (or, most kinds really).

Doug
If you like, please enjoy some of my hunt pics at:

http://public.fotki.com/DrDougRx

If you leave a comment, please leave your GB screen name so that I can reply back!