Author Topic: 38sp/357 (Read 574 times)

slopoke · « **on:** April 10, 2005, 08:15:03 AM »

I bought a set of RCBS used dies,3 dies. The box is marked.38 SWC.Part NO.18306. My question is can I also use these to load 357mags.
Thanks Guys

Duffy · « **Reply #1 on:** April 10, 2005, 09:11:26 AM »

Yes.
You just have to back them out for the 357's. The sizer stays the same, just the expander and seating/crimping die need adjustment. I think Redding makes a washer to simply slip under the die to adjust for the difference. RCBS may also. The included instruction sheet should explain this...

skb2706 · « **Reply #2 on:** April 11, 2005, 03:40:08 AM »

Yep and you can use them for .357 max too !

jd45 · « **Reply #3 on:** April 11, 2005, 12:31:36 PM »

I have a question........does the marking on the box mean .38 semi-wadcutter, or .38 Smith & Wesson cartridge? Just curious, jd45

Duffy · « **Reply #4 on:** April 12, 2005, 09:20:08 PM »

SWC would be for semi wad cutter. This usually means that you only get one bullet seating punch that is flat. Some include a round nose and a swc bullet seating punch.

skb2706 · « **Reply #5 on:** April 13, 2005, 03:27:27 AM »

If the bullet seating punch is not correct for the bullet you wish to use....call RCBS they will give you whatever one you want.