Author Topic: BULDGE IN 38/55 CASE  (Read 2108 times)

0 Members and 1 Guest are viewing this topic.

Offline missed_shot

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 166
BULDGE IN 38/55 CASE
« on: May 17, 2005, 05:27:23 AM »
Does any one know if RCBS COWBOY DIES will prevent my cases from bulging when loading .380 lead bullets in my 38/55/ ?? :(
DONUTS - IS THERE ANYTHING THEY CAN'T DO ??- HOMER SIMPSON

Offline ribbonstone

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 148
BULDGE IN 38/55 CASE
« Reply #1 on: May 17, 2005, 01:26:38 PM »
If they chamber freely and shoot well, then the buldge is cosmetic.  Just back the sizer off until your fired cases are sized just enough to securely hold that larger bullet and the buldge shouldn't be noticable.

Offline howdy doody

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 453
BULDGE IN 38/55 CASE
« Reply #2 on: May 21, 2005, 07:24:36 PM »
Ribbonstone has it. I shoot a 380 dia bullet in my Marlin 336 cowboy. My cases bulge too, especially at the bullet base.
My Marlin had problems from the start and that was with about 375 dia bullets. It would jam something fierce about 1/4" from completly chambering. I sent it back to Marlin and they opened the chamber. I happened to slug my barrel at 378 and change. I get my best accuracy with a 380 diam bullet weighing in at 250grs unlubed.
Good luck shooting your 38-55 whatever it might be. I love the way mine shoots. I wish I could shoot as well as it does :lol:
yer pard,
Howdy Doody
 
Darksider from Doodyville USA

Offline Haywire Haywood

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1230
  • Gender: Male
BULDGE IN 38/55 CASE
« Reply #3 on: June 13, 2006, 11:30:59 PM »
To answer your question, yes, they minimize that bulge.  What they do is expand the case to fit the bullet instead of the bullet doing it on seating.  You'll still see some of it but it will be uniform and less noticable.

good luck,
Ian
Kids that Hunt, Fish and Trap
Dont Steal, Deal, and Murder


usually...

Offline John Boy

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 381
Re: BULDGE IN 38/55 CASE
« Reply #4 on: April 29, 2007, 03:48:05 PM »
Missed:  Sounds like you have the H&R Target Model 38-55 ... and the 'We Gotch Ya'!
Need to have your chamber reamed and then fireform your cases. 
The 380 Bulge Issue disapperar
Regards
John Boy