« previous next »
Pages: [1]   Go Down

Author Topic: 22-250 loads  (Read 669 times)

0 Members and 1 Guest are viewing this topic.

Offline wolfpack

  • Trade Count: (0)
  • Member
  • *
  • Posts: 11
22-250 loads
« on: April 27, 2005, 11:42:54 AM »
Anyone have any opinions on bullets and powder for a 22-250. I'm looking at a fun plinking load with 40gr nosler BT and a 55 gr load. I also am looking for a good bullet in the 55gr range for deer.
Logged
---Happy Hunting WP

Offline ricciardelli

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1004
  • Gender: Male
    • http://stevespages.com/page8.htm
22-250 loads
« Reply #1 on: April 27, 2005, 02:46:20 PM »


5-shots at 200-yards
Firearm: Winchester 70
Optics:  Leupold 4x12AO
Case: Remington
Primer: Remington 9-1/2
Powder: 39.2 grains of H-414
Bullet: Sierra 55 grain Spitzer Boat Tail
Velocity: 3410 FPS @ 15' from muzzle
Logged

Offline simplicity

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 574
  • Gender: Male
22-250 loads
« Reply #2 on: April 29, 2005, 05:48:47 AM »
A load I've been wanting to try on deer with my 22-250 is a 60 gr. nosler partition. Useing imr 4320, the load I'm working with now is 33.7 grains about 3500 fps. Best group I've gotten so far is 3/4 inch at 100 yards. My rifle shoots best with 50 gr BT's. A 3/4 inch group at 100 is plenty good enough for deer since effective range energy wise is only good to 200 yrds.
Logged

Offline muzzleblast525

  • Trade Count: (4)
  • Contributor
  • ***
  • Posts: 398
22-250
« Reply #3 on: April 29, 2005, 11:53:25 AM »
Just got another 22-250, Remington 700 LV SF, and trying to work a load up for this gun.  I sold my other 22-250 last year, but believe I was shooting 35g Varget with 50g Nosler BT.  Killed 3 deer with it a couple of years ago, and none went out of sight.  Did a good job on the inside of the deer.

Wanting to work up a load with the Partion, or maybe with the 52g TSX.
Logged
Pages: [1]   Go Up
« previous next »