Author Topic: LOVEX Powders. (Read 2243 times)

Louis Farrugia · « **on:** April 30, 2005, 03:17:48 AM »

Has anyone heard about Lovex powders? They are made in Czech Republic and include powders for handgun and rifle. Any loading data available?

Kingfish · « **Reply #1 on:** April 30, 2005, 05:26:53 AM »

I haven't heard of that powder but AA used to sell several powders that were made in the Czech Republic and maybe their #'s would be the same or AA data could be used if you could find where the Lovex powders stood in the burn rate chart.

Bill

Louis Farrugia · « **Reply #2 on:** April 30, 2005, 07:35:00 AM »

Quote from: Kingfish

I haven't heard of that powder but AA used to sell several powders that were made in the Czech Republic and maybe their #'s would be the same or AA data could be used if you could find where the Lovex powders stood in the burn rate chart.

Bill

Thanks for the info. In fact I do have the AA equivalents to the Czech powders called Lovex. I believe AA are still importing them in USA from Europe - quite a surprise! Guess that I can use AA loading data then.

Greybeard · « **Reply #3 on:** April 30, 2005, 12:19:04 PM »

Quote

Guess that I can use AA loading data then.

Don't bet your life or your eyesight and fingers on it. Just because powders have the same number does not make them interchangeable. Nor does it make them the same because the same company makes them.

Unless you can get verification from a powder company that the data is interchangeable or you have pressure measuring equipment you'd be foolish to try to substitute them.

Louis Farrugia · « **Reply #4 on:** May 01, 2005, 01:37:04 AM »

Quote from: Greybeard

Quote
Guess that I can use AA loading data then.

Don't bet your life or your eyesight and fingers on it. Just because powders have the same number does not make them interchangeable. Nor does it make them the same because the same company makes them.

Unless you can get verification from a powder company that the data is interchangeable or you have pressure measuring equipment you'd be foolish to try to substitute them.

HI GRAYBEARD
LOVEX POWDER IS EXACT AS ACCURATE POWDERS YOU CAN SEE ON THERE WEB >www.explosia.cz
BEST REGARDS

LOUIS

Haywire Haywood · « **Reply #5 on:** May 01, 2005, 06:25:56 AM »

I got this from their website.. edited down from 2 different tables.

D 013-01   Disc powder Accurate® NITRO 100 equivalent
D 032-03   Spherical porous powder Accurate® No. 2 equivalent
D 036-03   Spherical powder Accurate® No. 5 equivalent
D 037-01   Spherical powder Accurate® No. 7 equivalent
D 037-02   Spherical powder Accurate® No. 9 equivalent
D 060-01   Tubular powder Accurate® 5744 equivalent
D 063-02   Spherical powder Accurate® 1680 equivalent
D 073-04   Spherical powder Accurate® 2460, 2520, 2474 equivalent
D 073-05   Spherical powder Accurate® 2230 equivalent
S 015-02   Disc porous powder Accurate® SOLO 1000 equivalent
S 016-01   Disc porous powder Accurate® SOLO 1250 equivalent
S 060-02   Tubular powder Accurate® 2015 BR equivalent
S 062-02   Tubular powder Accurate® 4064 equivalent
S 070-02   Tubular powder Accurate® 4350 equivalent
S 071-01   Tubular powder Accurate® 3100 equivalent

Graybeard · « **Reply #6 on:** May 01, 2005, 11:54:39 AM »

As long as it's on one or both of the powder company sites it should be fine. But don't just make assumptions based on heresay. That was my only point.