Author Topic: 10ga Scope Mount? (Read 513 times)

trky chsr · « **on:** May 31, 2005, 04:46:55 PM »

I have an older 10 ga that I currently have fibre optic sights glued to but I would like to try a scope. Is there a way to mount a NEF factory base? I have an Ultra Slug barrel with scope as well and I really like the combination. On the NEF website under the FAQ they say you can't drill and tap the barrel.

Critter · « **Reply #1 on:** June 02, 2005, 04:30:06 PM »

Find a GOOD local gunsmith and ask him if it can be done. I have drilled and tapped 12 guage barrels before and I think the 10 guage has thicker steel in the barrel.

jeff223 · « **Reply #2 on:** June 03, 2005, 07:01:42 AM »

heres the deal

the newer barrels come drilled n tapped for weaver scope bases and are setup for a red dot.i had my smith drill n tapp two holes closer to the breach so a shotgun scope could be used.there is lots of eye releaf this way and you will need it shooting the big 10ga

gr8gift · « **Reply #3 on:** June 17, 2005, 06:14:45 PM »

I had a smith do the same to my 10 GA turkey gun. Only difference is he used a long one piece base blank and tapped for the back 2 mounting holes and put to new ones farther back near the chamber. Work great with a Nikon camo VSD dot sight.