Can't seem to use a release

[nealglen37]

I just wondered if anyone was having the same problem..................I have tried to use two different types of modern releases......................but just can't seem to get the hang of it.............................its harder to pull back...............and the release aid just wont fit the right way against my jaw. I think I'm going to go back to my three finger glove release.........even though I would like to use the modern releases........anyone else have this problem ?

Thanks

[Highbrass]

Hmmm.........

I'm no expert but maybe it's increasing your draw length.I think your supposed to decrease your draw length if you use a release aid depending on what type of release you are using.hope that helps you out man.

[nealglen37]

I have a 31 inch draw (6'2)........................and the release looks like a pistal handle..............three cut outs for  your finger......then you push this lttle black pin at the top to release it .

Thanks for the help

[simplicity]

how are you releaseing it? With a release you use your back muscles to set it off. I Use a similar release with a thumb release I use my knuckles and always lock them up against my jaw. Then for releaseing pull with your back musclesand let your hand stretch and let the stretching of your hand set off the release. ANother good trick is to take a peice of string and put a loop at both ends ans have the lengh of the string be the same lench as your draw lengh, put one loop over your shooting hand thumb and practice your release. here is a trick I learned for finding the right draw lengh for using a release. take the span of your arms streched out to each side. Take trhe span and subtract 15 inches then divide by two and that will give you the correct draw lench you need. With draw lengh if you go even a half inch more it screws everything up but you can go two inches easily under and you can get away with it.

[NimrodRx]

A release should not change your draw length.  It will however change your anchor point.  

If you're shooting well with fingers, don't force a release.  I shoot fingers with my recurve and a release with my compound.  Each have their place.  

If you're intent on shooting with a release, try one that has a strap around your wrist.  I have found the Fletch Hunter to be suitable.  Good luck.

[darrell8937]

I found the transition very easy. I use a tru ball release that attached to your wrist. You draw with your wrist and fore arm. finger are free to just worry about the trigger. I bought a new bow at the same time and set it up from there. I shot at close range for only a hour or so. every thing came together just fine. I perform much better now,

[tvc15]

I STILL USE A 3 FINGER RELEASE. I THINK IT MAKES YOU PART OF THE BOW.  TVC15

[Redhawk1]

I use to shoot nothing but fingers, I found the transition very easy and my accuracy is consistent. I use a tru ball release that attaches to my wrist, I find it easier to draw back.    But the main thing is shoot what make you feel more comfortable.  

[dakotashooter2]

Don't push it. I never did get comfortable with a release and finally quit trying. I just felt like I lost all the "feel".

[wijim]

dont do whats not comfortable for you...but the release you described with the pistol grip....alot of finger shooters converting to releases will pull bacl...and then pivot their arm at draw so trigger is at bottom and knckles are on face.

try a wrist style if you are not burnt out from trying to force a release into your shooting.  but go to a proshop and have them adjust the length that fits you.  they'll also give you pointers on how to do the different type of release as opposed to fingers.

[darrell8937]

The longer you have been shooting fingers the harder the transition might be. I improved quite a bit switching. I have a friend who will not shoot a release. stubborn.. but he still hits most of the time.

[prairiedog555]

I just got a compound bow.  I want to use a release.  Do you use one of those attachments to the bow string and then grip it with the release?  or do you attach it directly to the string? 
If so, which attacment do you use, a cord or the plastic?

[mg66]

I just got a compound bow.  I want to use a release.  Do you use one of those attachments to the bow string and then grip it with the release?  or do you attach it directly to the string? 
If so, which attacment do you use, a cord or the plastic?

I use a string attached which is my nock point. Go to http://www.bghi.us/index.php?x=ultra2 and click on pictures to see in full size.

I have tried several releases but I found the  Cobra Pro Caliper Target Release is by far the best I have used. I have used this Cobra for four years now and still working like the day I got it. http://www.cabelas.com/prod-1/0004641410813a.shtml . I added a key ring with some nylon cord to put on my wrist so I cant drop it when in my stand.

EDIT: I have very large hands and long fingers and am yet to find a wrist release that is suitably long enough and comfortable enough (for me), that my index finger isnt doing contortions and bent double to squeeze the trigger.

[cam69conv]

#1 Problem...You were useing the "pistol grip" style of a release...That is one of the hardest ones to use for transfering finger shooters.. A wrist caliper style release will not only make the draw easier but it will also help your form tremendously.  Simplicity, you are way off the mark with the "back tension" releases....Most all hunters (that use releases) use a "trigger" release aid of some sort....The Back tension "surprise" releases arent very common in the field..They are fantastic for target and will really help you if you have "target panic" or if you tend to "creep" on release...But for hunting situations you dont want them..The cheaper cobra releases are ok...I personally shoot the Scott Mongoose and have for many years without a failier ever. Yes some release styles will shorten your draw length a little than what it would be for fingers but then there are many that are adjustable and would bring it right to the same position as where it would be for fingers. I too also recommend the String loop (not the metel or plastic ones because they are noisy as hell). It will help with any "torque" that your new style puts on the string and also will save the string serving...If you need further help dont be afraid to PM me here...

[jpsmith1]

I am a big fan of the caliper release.  I switched from fingers to a ball-bearing release to a caliper release.  No contest.  I have a pro-caliper release with an adjustable trigger.  I use a string loop, too and I switched from the metal job.  JUNK!!

First, don't force it.  If you aren't comfortable with it, don't use it.  If you really want to switch, it will require a lot of practice in the off-season to get comfortable.