« previous next »
Pages: [1]   Go Down

Author Topic: H&R Ultra Varmint/Fluted  (Read 1300 times)

0 Members and 1 Guest are viewing this topic.

Offline iamsniper1

  • Trade Count: (1)
  • Member
  • *
  • Posts: 35
  • Gender: Male
  • One Shot One Kill
H&R Ultra Varmint/Fluted
« on: May 20, 2005, 07:31:49 PM »
I will be picking up my new toy today,Had it in my hands,what a great
rifle,hope it shoots as good as it looks.this will be my third 223,i have had great sucess with the other 2.if you guys haven't seen one yet go to H&Rs
page.Choate stock and fluted barrel.where i live i paid 265+tax(PA)not a bad price at all.
Logged
Believe None Of What You Hear
Half Of What you Read
and All Of What You See
Works For Me.

Offline myarmor

  • Trade Count: (46)
  • Senior Member
  • *****
  • Posts: 3239
  • Gender: Male
H&R Ultra Varmint/Fluted
« Reply #1 on: May 21, 2005, 05:24:30 AM »
Welcome to the forum. Yeah I have been eyeballing these since I first saw them in the catalog. They look killer to me, yet not everyone likes synthetic. I haven't had a chance to actually check out one though in person. How does the flutes look? Are they deep? I believe you won't be disappointed with it. What kind of scope are you going to be mounting on it?
Logged

Offline iamsniper1

  • Trade Count: (1)
  • Member
  • *
  • Posts: 35
  • Gender: Male
  • One Shot One Kill
H&R Ultra Varmint/Fluted
« Reply #2 on: May 25, 2005, 06:40:43 PM »
Finally got my new toy set up,H&R SB2 F23 Fluted,223.Shes wearin a Bushnell Elite 3200 10x40 Mildot,Badger Max 50 rings,scope level,Harris bi-pod.Added cheek rest from a Ultimate Sniper stock,Free floated the barrel and of course cleaned all the factory goop out.Got lucky with the trigger pull according to my scale pull is about 3.75( NO CHIT) with absolutely no creep.
I guess alls thats left is the sight in part and fine tuning.
Logged
Believe None Of What You Hear
Half Of What you Read
and All Of What You See
Works For Me.

Offline Deadeye47

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1124
H&R Ultra Varmint/Fluted
« Reply #3 on: May 26, 2005, 01:22:36 AM »
:eek: Sweet!!!
Logged
" I believe that forgiving them [terrorists] is God''s function. OUR JOB is to arrange the meeting." Gen. Schwartzkopf........AMEN  Norman  :agree:

DECEASED 10-09-05

Offline Varminter

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 922
H&R Ultra Varmint/Fluted
« Reply #4 on: May 26, 2005, 06:25:11 AM »
How does the fluting look on the barrel? I was really interested in the barrel but not the stock set when i first saw them. The only thing that really turned me off was that i heard that the fluting was done poorly? Is this true?
Logged
_____________________________________
Drew :D
n240sx97@hotmail.com

I'd rather be judged by 12 than carried by 6.
The gene pool could use a little chlorine.

Offline Big Blue

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1334
  • Gender: Male
H&R Ultra Varmint/Fluted
« Reply #5 on: May 26, 2005, 10:59:18 AM »
Looks great! I can't wait for you to get out there and shoot it a bit so we can here the range report. Congrats on your new rifle!
Don
Logged

Offline iamsniper1

  • Trade Count: (1)
  • Member
  • *
  • Posts: 35
  • Gender: Male
  • One Shot One Kill
H&R Ultra Varmint/Fluted
« Reply #6 on: May 26, 2005, 12:07:06 PM »
I'd  rate the barrel fluting right along with the Remington 700 Sendero or
Savage.Very nice.I'm hoping that H&R will come out with a 308 fluted.
Logged
Believe None Of What You Hear
Half Of What you Read
and All Of What You See
Works For Me.

Offline Varminter

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 922
H&R Ultra Varmint/Fluted
« Reply #7 on: May 26, 2005, 12:14:23 PM »
I forget to welcome you to the board. So here goes kick your feet up and stay awhile. Dont forget to give us a range report on that fine rifle. I'm very interested in the results. I think you are the first one on the board to have one.
Logged
_____________________________________
Drew :D
n240sx97@hotmail.com

I'd rather be judged by 12 than carried by 6.
The gene pool could use a little chlorine.

Offline lostsniper308

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 790
  • Gender: Male
  • old beaten up Martini-Henry .303 we found.
    • My Facebook account
H&R Ultra Varmint/Fluted
« Reply #8 on: May 26, 2005, 01:28:22 PM »
where'd you get the bubble level?
Logged
B Co. 1-22Inf 1st BCT 4th Infantry Division
OIF 08-09 out of the army now

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
H&R Ultra Varmint/Fluted
« Reply #9 on: May 26, 2005, 01:34:58 PM »
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline lostsniper308

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 790
  • Gender: Male
  • old beaten up Martini-Henry .303 we found.
    • My Facebook account
H&R Ultra Varmint/Fluted
« Reply #10 on: May 26, 2005, 02:27:01 PM »
ah nice wanna grab one yes.
Logged
B Co. 1-22Inf 1st BCT 4th Infantry Division
OIF 08-09 out of the army now

Offline redrider101

  • Trade Count: (0)
  • Member
  • *
  • Posts: 14
H&R Ultra Varmint/Fluted
« Reply #11 on: May 27, 2005, 06:07:49 PM »
I can't beleive nobody has asked yet, so I will.

It seems to me that I read in a post a while back that when the new UVF came out that the ejector was going to be changed to a  mechanically operated system.  Is that TRUE ???  If my memory is working right (doubt it...) they said  it would have a new upgraded extractor  gizmo with teeth on it that CAMS the cartridge out when you open the action??? NOT the old ejector system w/spring that I and so many other people have had trouble with them not spitting out the case when it's supposed to.     PLEASE SAY ITS TRUE  :shock:
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
H&R Ultra Varmint/Fluted
« Reply #12 on: May 27, 2005, 06:32:02 PM »
Yup, the new extractor system is mechanical, not spring driven. I think it would rip the rim off the brass before a case stayed in the chamber, it's that positive. But you may still find new firearms with the ejector instead of the extractor since H&R is in the process of using up the old ejector underlugs first. My 204 Ruger bought last Ocober has and extractor. New style extractor underlug on top, old at the bottom in the pic.

Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline De41mag

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 688
    • De41mag@aol.com
H&R Ultra Varmint/Fluted
« Reply #13 on: May 27, 2005, 06:42:19 PM »
Seen my first one today at a gun shop in Hartselle AL.
It looked really nice, felt good but I seen one problem.  :shock:
I think the same person that put the stock bolt in is the same one who has been stripping the screws on the recoil pads. Man was that bolt boogered up. It looked stripped and almost all the black paint was gone off of it.  :? I did not stick around long because the shop was closing when I got there.

Dennis  :D
Logged
Pages: [1]   Go Up
« previous next »