Author Topic: Need a .357 Mag reamed to Maximum (Read 391 times)

jason280 · « **on:** May 27, 2005, 09:21:41 AM »

Can anyone recommend a good smith to ream a .357 Magnum to a .357 Maximum? I am picking up a .357 Handi next week, and I would like to convert it to a Maximum chamber. Thanks!

Badnews Bob · « **Reply #1 on:** May 27, 2005, 10:56:26 AM »

Do it yourself and enjoy your own work, It takes ten minutes or less and toaly hand powerd. Talk to one of the guys on the boards here and see if you could rent one from them or look for one of the companys that rent reamers, I'm sure Quick can point you in the right direction there.

quickdtoo · « **Reply #2 on:** May 27, 2005, 11:13:46 AM »

Jason, Leftoverdj has a reamer that he has been renting out, here's a thread on it....

http://www.graybeardoutdoors.com/phpbb2/viewtopic.php?t=55575&highlight=357+reamer

There are also a couple reamer rental outfits online...

http://www.reamerrentals.com/

http://4-dproducts.com/chamber_reamers.html

If you want a smith to do it, I would recommend you check with Wayne York, he's doing a rebore for Mac and I on our 25-06 to 338-06 Ultra barrels. He's also rebluing my BC barrel for me.....

http://home.earthlink.net/%7Eoregunsmithing/index.html

shaner · « **Reply #3 on:** May 27, 2005, 04:02:40 PM »

jason i got a reamer if yur goin to do it yurself, let me know
shaner6996@yahoo.com

Datil · « **Reply #4 on:** May 27, 2005, 07:40:24 PM »

Don't take it to a smith, Do it yourself Easey to do 15 minutes
of work be proud of you work. My 2 cents Datil