Author Topic: Cleaning Traps (Read 789 times)

Tim B · « **on:** July 18, 2005, 05:14:09 AM »

How many clean their traps with saniflush?
How much do you use per gal of water?
Just wondering what everyone else does....Im always trying to find a better way.

I generally just boil traps clean, dye, wax and am done.
Tim B

Newt · « **Reply #1 on:** July 18, 2005, 01:23:22 PM »

I tumble mine. Get your self a concret mixer. Put in some "pea" gravel and water. Drop in your traps. They will be down to bear steel in about 15 minets.

skidway · « **Reply #2 on:** July 18, 2005, 02:59:25 PM »

I only use it for new traps to get the oil off. After they've rusted up the first time I don't think there is any reason to use it again. Then I'm more concerned about keeping them from rusting.

wormbobskey · « **Reply #3 on:** July 20, 2005, 04:31:13 PM »

If you use the snaiflush make sure you rinse your traps completely after you boil them in it. Saniflush is very corrosive. You would be better off just boiling and rinsing your traps in good clean water. Worm

jim-NE · « **Reply #4 on:** July 22, 2005, 12:40:56 AM »

I've had pretty good luck using some old milk crates to put a dozen traps in each, then load up as many as my pickup will hold and I make a trip down to the local coin op car wash. The crates keep the traps contained under the high pressure hose force, and our local operation has heated water with a decent soap and rinse time for your quarters. I don't know if its perfect, but it gets every bit of caked on dirt and grime off.
I use speed dip now on most of my traps, and unless I get a trap really shined up from a coon I haven't had much rust issues at all since switching to the speed dip.
I just don't have the facilities set up here for boiling a big batch of traps anymore, so this method works for me.

Wackyquacker · « **Reply #5 on:** July 22, 2005, 02:42:46 AM »

I speed dip also, but I still boil them. I boil in plain water. Since there is no issue with wax I see no reason for the sani flush; just want the heat and agitation from the boilng to get the crud off.

This turkey frying craz has made cheap burners widely available. I saw one the other day that had a ring around the top to prevent the pot from sliding off...this would be a big plus for those that wax.

skidway · « **Reply #6 on:** July 22, 2005, 01:53:29 PM »

I went to the turkey fryer method this year and it works very well. See them in yard sales often.

trapperbuddy93 · « **Reply #7 on:** August 07, 2005, 09:23:14 AM »

i just pray em with the water hose.