« previous next »
Pages: [1]   Go Down

Author Topic: Where to find drawings, dimensions, or plans?  (Read 1315 times)

0 Members and 1 Guest are viewing this topic.

Offline gdeputy

  • Trade Count: (0)
  • Posts: 2
    • http://blastzone.com
Where to find drawings, dimensions, or plans?
« on: July 01, 2005, 11:01:50 AM »
I'm on the hunt for dimensioned drawings of cannons.  I'd appreciate any pointers to web sites, books, whatever.  I'm making a smallish cannon out of 2.5" diameter 4130, primarily just to make noise.  I'd like to have some drawings to work from to make a replica, something nice to look at, as well as hear.  

Any help?
Logged

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12607
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Where to find drawings, dimensions, or plan
« Reply #1 on: July 01, 2005, 11:30:56 AM »
Yep we got them!  Go to  Where to find Blackpowder Cannons and shooting supplies posted at the top of this forum and look around. You will find plans listed there.

Some of the other fellows here have plans that they might also share with you.
Logged

Offline Cat Whisperer

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 7493
  • Gender: Male
  • Pulaski Coehorn Works
Re: Where to find drawings, dimensions, or plans?
« Reply #2 on: July 02, 2005, 01:47:32 AM »
Quote from: gdeputy
I'm on the hunt for dimensioned drawings of cannons.  I'd appreciate any pointers to web sites, books, whatever.  I'm making a smallish cannon out of 2.5" diameter 4130, primarily just to make noise.  I'd like to have some drawings to work from to make a replica, something nice to look at, as well as hear.  

Any help?


I can send you an AutoCAD drawing of anything I've posted here.  If I haven't drawn it yet it doesn't take much time.  File or print.
Logged
Tim K                 www.GBOCANNONS.COM
Cat Whisperer
Chief of Smoke, Pulaski Coehorn Works & Winery
U.S.Army Retired
N 37.05224  W 80.78133 (front door +/- 15 feet)

Offline GGaskill

  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 5668
  • Gender: Male
Where to find drawings, dimensions, or plan
« Reply #3 on: July 02, 2005, 04:33:43 AM »
Any idea what style barrel you are interested in?
Logged
GG
“If you're not a liberal at 20, you have no heart; if you're not a conservative at 40, you have no brain.”--Winston Churchill

Offline Powder keg

  • GBO Sponsor
  • GBO Supporter
  • Trade Count: (0)
  • A Real Regular
  • *****
  • Posts: 752
Where to find drawings, dimensions, or plan
« Reply #4 on: July 03, 2005, 05:13:58 AM »
CW, I know you have been busy, but. Have you had a chance to draw up that Pack Parrott? Thanks, Wes
Logged
Wesley P.
"Powder Keg"
Custom Machine work done reasonable. I have a small machine shop and foundry. Please let me build your stuff. I just added Metal etching to my capabilities. I specialize in custom jobs.
"When the gun is lost, All is lost"

Offline Cat Whisperer

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 7493
  • Gender: Male
  • Pulaski Coehorn Works
Where to find drawings, dimensions, or plan
« Reply #5 on: July 03, 2005, 12:41:35 PM »
Ahhhhhhhhhhh  ...  it has been a while hasn't it!

Let me get to looking through my stuff to see where I left off; and get moving again.
Logged
Tim K                 www.GBOCANNONS.COM
Cat Whisperer
Chief of Smoke, Pulaski Coehorn Works & Winery
U.S.Army Retired
N 37.05224  W 80.78133 (front door +/- 15 feet)

Offline GGaskill

  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 5668
  • Gender: Male
Where to find drawings, dimensions, or plan
« Reply #6 on: July 06, 2005, 03:01:59 PM »
Logged
GG
“If you're not a liberal at 20, you have no heart; if you're not a conservative at 40, you have no brain.”--Winston Churchill

Offline guardsgunner

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 421
Where to find drawings, dimensions, or plan
« Reply #7 on: July 07, 2005, 08:34:27 AM »
GG,
    Powder Keg is looking for drawings for a pack pattott. Much like a regular parrott but short and of lenght for the Mt. Howitzer carriage.
    There is one being shot in the N-SSA but it is not known if they were  ever produced. That one was built from arsenal drawin's.
Logged

Offline GGaskill

  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 5668
  • Gender: Male
Where to find drawings, dimensions, or plan
« Reply #8 on: July 07, 2005, 09:17:21 AM »
There is at least one picture of a pack Parrott in the South Bend Replicas catalog.  I think they even list it in the price list (with minimal dimensions.)

I don't have anything on it.  Maybe AOP does.
Logged
GG
“If you're not a liberal at 20, you have no heart; if you're not a conservative at 40, you have no brain.”--Winston Churchill

Offline CAV Trooper

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 228
Where to find drawings, dimensions, or plan
« Reply #9 on: July 07, 2005, 09:29:43 AM »
Quote from: GGaskill
There is at least one picture of a pack Parrott in the South Bend Replicas catalog.  I think they even list it in the price list (with minimal dimensions.)


The SBR catalog lists it as a '2.9" Parrott Rifled Pack Howitzer'. It was produced from a "Paulson Brothers drawing of a Don Lutz archival discovery"

Length, 36"; weight, 350 lbs; bore, 2 3/4" smooth

That's a pretty substantial chunk of iron. I seem to ahve lost my SBR price sheet so I'm not sure what the cost is .
Logged
“Only two things are infinite, the universe and human stupidity, and I'm not sure about the former."
Albert Einstein

Offline Cpt Ed

  • GBO Supporter
  • Trade Count: (0)
  • Avid Poster
  • *****
  • Posts: 209
  • Gender: Male
Where to find drawings, dimensions, or plan
« Reply #10 on: July 07, 2005, 10:50:08 AM »
Price for the 2.9” PARROTT RIFLED PACK HOWITZER, from South Bend Replicas, Inc. 350 pound smooth bore barrel, lathe turned is $2976 plus shipping. The price comes out to $8.50 per pound.
That is a lot of little cannon.  :eek:
Logged
Always think safety...be a More Complete Cannoneer.

"I HATE SMALL TOWNS BECAUSE ONCE YOU'VE SEEN THE CANNON IN THE PARK, THERE'S NOTHING ELSE TO DO."

Offline guardsgunner

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 421
Where to find drawings, dimensions, or plan
« Reply #11 on: July 07, 2005, 11:02:55 AM »
Sorry, I was thinking on a different level.  I mean that there were no pack parrott's made during the civil war and that the one's being shot are made from  archival drawing's.
I've been around the Civil war stuff all my life and have become stuck in a what is and what isn't rut.
Logged

Offline Powder keg

  • GBO Sponsor
  • GBO Supporter
  • Trade Count: (0)
  • A Real Regular
  • *****
  • Posts: 752
Where to find drawings, dimensions, or plan
« Reply #12 on: July 07, 2005, 01:00:28 PM »
The drawing CW is kindly redrawing for me is from AOP. Don Lutz? gave me a copy because it was a pretty bad copy. I guesss his copy is bad also? I was steered there by Cannons online. Their smoothe bore model is $1850 for the tube. Add $1900 for rifling. I was thinking of making a 1/2 scale model. Later,
Logged
Wesley P.
"Powder Keg"
Custom Machine work done reasonable. I have a small machine shop and foundry. Please let me build your stuff. I just added Metal etching to my capabilities. I specialize in custom jobs.
"When the gun is lost, All is lost"
Pages: [1]   Go Up
« previous next »