Author Topic: Official Contest Entry  (Read 646 times)

0 Members and 1 Guest are viewing this topic.

Offline Jacktheknife

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 170
Official Contest Entry
« on: June 11, 2005, 08:37:50 AM »
Hey Y'all,

     I have been reading the Cannon and Mortar forum off and on for years.
However I saw the contest for making a golfball mortar and my {Summmertime 05' goal}    has been decided!      
Its all clear now...    The path is laid out before me...                                                                                                  

            "I'm gona make me a Mortar"!
                                                                                                                                                                                 
     A friend,  old Terry Huber,  who died on his motor{cycle},
43 years ago, had a cannon.                                                                   It was a piece of pipe with threads on one end.
He had drilled a hole in the threads, so that the cap could be screwed over the hole, with a twist.  Bent the end of a firecracker fuse so that the tip of the fuse would hang in the drilled hole till  lit.                                         As the fuse burned down,  the cap was tightened.                               Awesome technology,  and ingenius firing device, for the 7th grade.

        The cannon would fire a marble like a bullet!
And a  'for sale'  sign 70-80 yards away was the target,                             if the people wern't home.

          Now, I find myself not only still alive, but 43 years older.
'I'm gona build me a mortar', as there are others like me on this forum thing,  and I can pick their brains, and learn from them.  And I can buy stuff now whereas in the sixth grade I never had much money.                       I'm really encouraged.   Yeah!

           Terry was smart and it was not his fault he was killed on his 305 dream,  some old lady pulled out in front of him and stopped!
His chick flew over him and landed in the grass, and she was fine.            But Terry hit the 'port beam' of that car and it was terrible.                                                      They were hauling...  { Colorful explecitive}   ... like 80mph!

            Terry took the cannon making technology with him when he died.
But now I am onto a forum as cool and useful as the trapper forum,         or the Hog killing forum.  The cannon-mortar making forum!

              I will work hard and since, as my name implys,                          {Jack the Knife}  I have a knife shop to use.  Alright!  I can see it all now,
Jack {the Knife's} World famous fifth century forge, Knifeshop, Skullery,
Brewry,  and now... Cannon Factory.   Catchy ain't it?


             After my motorcycle wreck four years ago I do tend to ramble on, but while I have y'all here ...   what is a powder chamber?               and how would one be manufactured?                                                      in the end of a pipe???                                                                           {I'm gona get me a welder too}

              Terrys cannon used a self enclosed firecracker for the explosive charge.  There was no powder chamber.
Before I found this forum I had for decades thought that a home made cannon... would need to be fired by another firecracker or a small bomb, actually.
{And legally... Probably why I never built one}
A small bulb like for a flashlight, with the glass part filed away enough to fill it with shotgun powder,  {as I reload}  taped over and placed in a film can full of shotgun powder, with two wires running out two drilled holes,          { in the can and two holes drilled in the cannon too,                             and trailing to a flash light battery.....   and then loading a beer can wrapped in something down the cannon barrell.
The small battery was to be used to fire the primer and with two real long wires I figured it was safe enough bacause I could fire the 'thing' from behind the wood pile...       was the extent of my cannon making skill.

          {Another reason why I  never tried it }


         {Sounds like I would still be in jail if I had survived at all.}


                   

                                                            J. Knife
Invalid e-mail address. Fix it asap. GB

Offline Cat Whisperer

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 7493
  • Gender: Male
  • Pulaski Coehorn Works
Official Contest Entry
« Reply #1 on: June 11, 2005, 11:11:04 AM »
J.Knife -

Welcome, and thanks for the good reading!

The mortar making contest is still open - if you send DD a PM, he'll get back with you with the materials he still has left.  If he's too swamped at the present send me a PM & I'll handle it.

The mortar contest is for anyone who wants to make a mortar, using the materials we send in whatever creative way possible, but it will be in golf-ball caliber and there are a few other minor restrictions like photos and plans (simple) and the competition of firing golf balls at a 30 yard target.

There obviously are other ways to make mortars as well and tossing out a few questions here will generate a variety of responses - much food for thought.
Tim K                 www.GBOCANNONS.COM
Cat Whisperer
Chief of Smoke, Pulaski Coehorn Works & Winery
U.S.Army Retired
N 37.05224  W 80.78133 (front door +/- 15 feet)

Offline Jacktheknife

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 170
Official Contest Entry
« Reply #2 on: June 11, 2005, 11:27:45 AM »
Yes sir.   Thank you sir.

                                   
                                                       J. Knife
Invalid e-mail address. Fix it asap. GB

Offline mortarnoobie

  • Trade Count: (0)
  • Member
  • *
  • Posts: 62
Official Contest Entry
« Reply #3 on: June 19, 2005, 04:59:59 AM »
sorry about ur friend
Kansas City area;  KS

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12609
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Official Contest Entry
« Reply #4 on: June 19, 2005, 05:17:30 AM »
...and I have figured out how to make the golf ball go only 30 yards.  FYI 5 grs of 1F will only make the golf bal fall out of the end of the barrel.

Offline Jacktheknife

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 170
Official Contest Entry
« Reply #5 on: June 19, 2005, 08:44:34 PM »
Thanks Mort

 
                                Knife
Invalid e-mail address. Fix it asap. GB